Hello and good evening, I have a ps4 controller with the model (JDM-055) and after replacing both sticks I ran into multiple problems, one of them was the L3 internal traces were torn when I replaced the left stick, so I followed This form (
https://acidmods.com/forum/index.php?topic=44792.0) and managed to fix it with a jumper to a resistor on the other side of the board, but I don't know if this will cause any of the two issues I have currently so basically this is the backstory :P
I was able to fix most of the issues but the last two are:
The R3 button is continuously pressed as shown in the pictures, I will upload more pictures of the board for anyone who wants to see it. (1)
Board image:
https://i.imgur.com/fY8sxjP.jpgL3 Fix:
https://i.imgur.com/kN2rJa4.jpghttps://i.imgur.com/ptzmb2h.jpgAnother problem that happens 1 out of 10 times is that the L3 button is pressed when moving the right stick to the right! I will leave a video of this issue below. (2)
Video:
https://youtube.com/shorts/TKkIaXTXC_E?feature=sharethank you all in advance!