Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62239 times)

replicashooter · « **Reply #60 on:** January 12, 2007, 07:22:32 AM »

Quote from: cyberpyrot (Site Admin) on January 12, 2007, 07:16:31 AM

you can enter your pm at the bottom of the main site

Aha.

That's what I get for just flicking between this forum and the PSP one

F00 f00 · « **Reply #61 on:** January 12, 2007, 09:40:11 AM »

Can someone take a pic of the ribbon conector on the mobo that gose to the powerswitch board? I need it to mark out the solder points, mines already glued.

SYSTEM aka (Cyberpyrot) · « **Reply #62 on:** January 12, 2007, 09:44:42 AM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 09:40:11 AM

Can someone take a pic of the ribbon conector on the mobo that gose to the powerswitch board? I need it to mark out the solder points, mines already glued.

they may not be as good as your but here are the points for the face buttons

F00 f00 · « **Reply #63 on:** January 12, 2007, 09:51:48 AM »

Thats cool, but I need a pic of the point on the mother board, its for the solder point of the right sholder.

btw I called work an theres a pakage there. . . fingers crossed :nerves:

SYSTEM aka (Cyberpyrot) · « **Reply #64 on:** January 12, 2007, 09:52:19 AM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 09:51:48 AM

Thats cool, but I need a pic of the point on the mother board, its for the solder point of the right sholder.

btw I called work an theres a pakage there. . . fingers crossed :nerves:

sweet

SYSTEM aka (Cyberpyrot) · « **Reply #65 on:** January 12, 2007, 09:54:20 AM »

replicashooter · « **Reply #66 on:** January 12, 2007, 09:57:55 AM »

cyber - Can you read or do you have problems in that area?

Serious question, I ask because there always seems to be a huge difference between the Q and your A.

SYSTEM aka (Cyberpyrot) · « **Reply #67 on:** January 12, 2007, 09:58:31 AM »

SYSTEM aka (Cyberpyrot) · « **Reply #68 on:** January 12, 2007, 10:00:05 AM »

Quote from: replicashooter (R&D) on January 12, 2007, 09:57:55 AM

cyber - Can you read or do you have problems in that area?

Serious question, I ask because there always seems to be a huge difference between the Q and your A.

Yes I can read I just try and gather as much as I can without spending to much time on each post im at work using duel monitor trying to answer threads and post at the same time.

SYSTEM aka (Cyberpyrot) · « **Reply #69 on:** January 12, 2007, 10:03:36 AM »

And by the looks of the ribbon connector he may have to use the tracers on the power switch board because of the lack of space to solder

replicashooter · « **Reply #70 on:** January 12, 2007, 10:05:14 AM »

Quote from: cyberpyrot (Site Admin) on January 12, 2007, 10:00:05 AM

Yes I can read I just try and gather as much as I can without spending to much time on each post im at work using duel monitor trying to answer threads and post at the same time.

Ah - That explains it.

What's the point in having dual monitors if you are only paying half the attention? :whistle:

SYSTEM aka (Cyberpyrot) · « **Reply #71 on:** January 12, 2007, 10:06:24 AM »

Quote from: replicashooter (R&D) on January 12, 2007, 10:05:14 AM

Ah - That explains it.

What's the point in having dual monitors if you are only paying half the attention? :whistle:

Well I have to focus more on work then the forums but aventualy I will get it right..

F00 f00 · « **Reply #72 on:** January 12, 2007, 10:10:47 AM »

thanks man. That second pic is spot on.

I've already done the soldering there. Its not that bad, only one point to solder.

F00 f00 · « **Reply #73 on:** January 12, 2007, 10:53:12 AM »

Its a bit tricky but has to be done. The dpad is more dificult as its just as small but theres 4 points close together. But if I can do it other people will be able to too.

SYSTEM aka (Cyberpyrot) · « **Reply #74 on:** January 12, 2007, 10:55:40 AM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 10:53:12 AM

Its a bit tricky but has to be done. The dpad is more dificult as its just as small but theres 4 points close together. But if I can do it other people will be able to too.

I soldered 19 points together before

F00 f00 · « **Reply #75 on:** January 12, 2007, 10:59:24 AM »

Quote from: cyberpyrot (Site Admin) on January 12, 2007, 09:44:42 AM

they may not be as good as your but here are the points for the face buttons

Hey, how come your powerboard is blue?

SYSTEM aka (Cyberpyrot) · « **Reply #76 on:** January 12, 2007, 11:07:54 AM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 10:59:24 AM

Hey, how come your powerboard is blue?

it's not a sony board

F00 f00 · « **Reply #77 on:** January 12, 2007, 12:41:38 PM »

I've just realized I have wired my socket back to front. I am gona have to redo the whole socket. I think I am gona cry.

SYSTEM aka (Cyberpyrot) · « **Reply #78 on:** January 12, 2007, 12:43:26 PM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 12:41:38 PM

I've just realized I have wired my socket back to front. I am gona have to redo the whole socket. I think I am gona cry.

LOL just flip it over

F00 f00 · « **Reply #79 on:** January 12, 2007, 12:49:38 PM »

If only it was that easy. :cryingwaa:

SYSTEM aka (Cyberpyrot) · « **Reply #80 on:** January 12, 2007, 12:50:34 PM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 12:49:38 PM

If only it was that easy. :cryingwaa:

I know I was teasing

F00 f00 · « **Reply #81 on:** January 12, 2007, 01:03:58 PM »

Man I feel like throwing this thing out the window. Beer. That'll fix everything

SYSTEM aka (Cyberpyrot) · « **Reply #82 on:** January 12, 2007, 01:06:35 PM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 01:03:58 PM

Man I feel like throwing this thing out the window. Beer. That'll fix everything

yup

F00 f00 · « **Reply #83 on:** January 12, 2007, 01:41:05 PM »

Now my soldering iron tip is f ed up. God hates me. I am gona get a new one tomorow, pic up those sockets and get this thing finished befor I compleatly loose my mind. Stupid soldering iron. Grrrrrr. . . .

SYSTEM aka (Cyberpyrot) · « **Reply #84 on:** January 12, 2007, 01:42:30 PM »

Quote from: F00 f00 (R&D-Q&A) on January 12, 2007, 01:41:05 PM

Now my soldering iron tip is f ed up. God hates me. I am gona get a new one tomorow, pic up those sockets and get this thing finished befor I compleatly loose my mind. Stupid soldering iron. Grrrrrr. . . .

Yeah I just bought two new ones

replicashooter · « **Reply #85 on:** January 12, 2007, 04:46:47 PM »

Mods can be a

like that.

replicashooter · « **Reply #86 on:** January 12, 2007, 05:18:58 PM »

Quote from: cyberpyrot (Site Admin) on January 12, 2007, 09:44:42 AM

That is some great soldering -

F00 f00 · « **Reply #87 on:** January 13, 2007, 08:56:48 AM »

Ok the socket is compleatly rewired and I've added some LEDs to the controller. All my stuff from cyber arived (thanks man, you rule). So I should be able to finish this by tomorow night. I am swaping all the LEDs for white ones at the mo (thanks for the tut new-Neubit-).

Heres a pic of how the controller looks now.

SYSTEM aka (Cyberpyrot) · « **Reply #88 on:** January 13, 2007, 09:10:46 AM »

Awsome

replicashooter · « **Reply #89 on:** January 13, 2007, 09:23:13 AM »

Looking good, just picked up a ceramic PS2 controller:

Goes nicely with my PSP

Need to find a cheap 2nd hand 1.50 (or downgradeable) PSP in the UK now to experiment with. Anyone know where to pick one up for less than a ton?

F00 - You got any pics of the socket yet? Also, how have you interfaced to the PSP?

The biggest problem I'm having at the moment is thinking of how to make the finish look retail - Going to look at alternate methods of connection as I'm still positive that the PSP will be using a signal decoding method that is similar to the PS1/2.

This would cut down on the wires as point to point won't be needed, just controller chip to controller chip.

News:

Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62239 times)