https://www.acidmods.com/
OMG thank you!!!! :D this is the best code on this site!! right next to t0pfire's :) my friends say topfires is a little slow compared to what they see other players use but it seems fine for me :/ did you base your speeds and such off of t0pfire's as well?
thanks!! ive been waiting for someone to release something like this!
EDIT: if any of the controllers i install this on are CG or CG2 ill use t0pfire's install diagrams and tell you if its working or not if someone does not beat me too it
EDIT2: t0pfire's code for me had this problem where it got all trippy if i used it while CHARGING like it would randomly aim or sometimes it would not go off of aim and some person shot me and looking at me aim the whole time. or it would shoot randomly (i got some kills like this but i dont like it) i dont know why it does that will reply if it does with this one too or its my install or what.
what is the pass of the zip??
is thie hex for PIC 12F683 ??Yes this is for that chip. All of our rapid fire codes are for that chip.
Hey sqs, love the code being playing bops all day today. One small problem, your black ops mode gets mod blocked. Particularly when you using m16 or g11, and also happened a few times with the fal. Any chance you couls tweak it a little, maybe just a few sps slower. Ps i am a cod fanatic and play a lot.
I am only talking about mode 5, nothing else, and I am using the user mode now, however I was simply letting you know about mode 5. I know what am talking about I have been around modding controllers since the original spitfire, of which I still have in my draw. Never the less works well otherwise.
Do you still have the spitfire code?The spitfire code is basically useless now. It was one speed back when cod 4 was first released. It also had the ability to change the mapping of some buttons. I only have it on the chip (16f688) from memory, and I need a new program board. King mike may have the original asm for it maybe, not sure, you would have to ask him.
Ok, I can do something for you, choose the speed that you think fits best for black ops mode 5 and tell me.Bops will detect anything over 8.94-9.00 sps. So according to your sps table speed 200.
To do this test speed in mode 8, the default speed is # 208.
I guess i dont need it then anyway, if its only a one speed. Thanks anyway. Glad im not missing out on anything...
Ok, I can do something for you, choose the speed that you think fits best for black ops mode 5 and tell me.
To do this test speed in mode 8, the default speed is # 208.
IS there a way to make this fire with the right triggers and not have to use tact switches?
it already does the tact switches are just used to change mode
Sweet - so I can just use the sync button then.. Thanks!!! Very cool I will hook it up tonight.
Wish I found this earlier! Why isn't it on the AM code list?Perhaps because I am not a U.S. citizen?
best code on the list!lookin forward for more codes from uThanks, I'm glad you liked it
Perhaps because I am not a U.S. citizen?One of our best coders is british so don't worry, AM is not racist.
Thanks, I'm glad you liked it
please don't double post next time a 5% warning
One of our best coders is british so don't worry, AM is not racist.The difference from topfire to this is very much, just take a look at the programmable modes and you'll know what I mean, the shots per round (3 or 5) also need some tweaks in the topfire code, I have personally used the HEX of t0pP8uZz and that is why I can assure you. But he has his deserved credit and because my idea was based on his work.
I think it's because it is similar to the topfire code.
i cant wait to see itFrosty if you want a drop shot just link some diodes, resistors and a tactile button up to the B button, RT and power.
maybe even a dropshot :winker:
i think you may want to sell as a kit tho and not release
Is the diodes on MATRIX install necessary? and if yes, what kind should i use, dunno if this is a noob question, havnt worked with diodes alot...These guys specify the parts for a reason... yes you have to the diodes use 2x1N4148 diodes (matrix only)
:dntknw:
These guys specify the parts for a reason... yes you have to the diodes use 2x1N4148 diodes (matrix only)
If you click the link in the first post you will see the installation Tutorial
click here to see parts list and install just like in the first post hope this helps
https://www.acidmods.com/forum/index.php/topic,34229.0.html (https://www.acidmods.com/forum/index.php/topic,34229.0.html)
Hi all,
Many message request me an update, i can make a little update in default speed, shooting style (like: Normal, Duty cycle, Normal with 3 Shot Burst, etc.) in modes, What speed suggest?
Reply this message with your suggestion, like example below:
MODE 1: - Duty Cycle - COD Black Ops II (Speed #192)
MODE 2: - Normal Fire - COD MW3 (Speed # 203)
MODE 3: - 3 Shot Burst - COD MW3 (LED2 22 flashing - LED3 4 flashing)
MODE 4: - Normal Fire - Battlefield 3 (Speed # 185)
MODE 5: - Normal Fire - GOW 3 (Speed # 179)
MODE 6: - Normal Fire - HALO 4 (Speed # 195)
MODE 7: USER PROGRAMMABLE MODE - Normal Cycle - COD MW2 (Default Speed # 193)
MODE 8: USER PROGRAMMABLE MODE - Duty Cycle - COD Black Ops II (Default Speed # 208)
You can determine the speed based in the SpeedRatesTable.pdf included in zip file or indicating the number of flashes in each LED, you can use the USER PROGRAMMABLE MODE 7 or 8 for determine speed.
i like that.
be cool if this was stealth
Is it possible to add burst for COD Black Ops II?
Can i find the best speeds for burst in mode 7 & 8?
I thought these mods are for rapidfire and not for burst?
Well, this is the list of modes that I would like:
I will test your list tomorrow and provide some feedback.
Well, this is the list of modes that I would like:
MODE 1 - BLACK OPS 2 (23||0)
MODE 2 - MW3 MK14 W/RAPIDFIRE (24||5)
MODE 3 - MW3 MK14 NO RAPIDFIRE (24||3)
MODE 4 - BLACK OPS 1 (20||2)
MODE 5 - MW2 (same as the original code)
MODE 6 - COD 5 (PATCHKILLER)
MODE 7 - ADJUSTABLE (set on #195 for halo series)
MODE 8 - ADJUSTABLE 3 ROUND BURST (you can adjust the speed burst for each COD)
With this code you will kick ass on every single game :tup:
Is there any difference in mod block between online and offline?In all COD almost always varies the speed Between online and Offline
What about matrix2 boards?For install matrix2 just install like matrix1
Do we need resistors for triggers on these?
you dont need the 330ohm resistors for a CG board, just the 100ohm going to the LED's.
Thanks for the response sir. I see a 10k ohm going to the right tac? that 10k and the 2-100ohms are all i need for a cg board right?
Okay it worked thanks for the supprot. Is there any chance of trying to get asm file so i can change the speeds around for Black OPS 2 or can the developer of the code make me a quick change up for BO2. 8sps..or the best speeds that will work fast in BO2.
this is a great code man, keep up the good work. i am only having 1 little problem with it, every now and then it starts firing by itself and wont stop. i have to remove the battery 2 or 3 times to stop this from happening. when it start firing by itself its a slow sps but when i pull the trigger it jumps right up in speed. i have checked my controller for any pinched wired and double checked the setup but cant find any faults. i thought it was my play and charge kit so i tried it with normal batteries and still getting the same thing. still all in all a great code when its not going crazy. it is fitted in a matrix 2 by the way.
Thank you, do not forget that the speeds that I used in my last list is only was representative to set an example, the idea is that you provide a list with an speed you've tested before in each one of the modes, I hope your contribution, greetings.
i have tried it with a new chip, it still did the same. i believe that i have found the issue now tho. the contact for the positive was connected by tp5 which has an off state of 0.05v which means there is constant power to the chip. going to try drawing the power from an alternative point on the board.
i keep having problems with this hex and topfire where as soon as i turn the rapid fire on the controllers trigers just go nut and the lights flicker funny btw im using a cg2 controllersame here, anybody know why this is happening? i am using a matrix 2 controller
When Play & Charge is connected this have an overload and maybe have trouble firing or another button, this is for all controllers CG 1 & 2, Matrix 1 & 2
The best way to use is with Rechargable battery.