AcidMods Resources ----- ( These are helpful tools for modding ) => Open Source Code & AcidMods Free Code => Topic started by: SYSTEM aka (Cyberpyrot) on July 29, 2008, 07:33:10 PM
Title: acidmods origional 12F683 HEX rapid fire
Post by: SYSTEM aka (Cyberpyrot) on July 29, 2008, 07:33:10 PM
Title: Re: 12F683 HEX
Post by: KingMike_OS on July 29, 2008, 07:34:36 PM
there every one happy there is the wiring Digrams for one or 2 swtichs This works on both Type of Controller Old and New Style Wireless no resister needed I tested on both wireless so please test it on wire one and let me know.
Title: Re: 12F683 HEX
Post by: SYSTEM aka (Cyberpyrot) on July 29, 2008, 07:46:05 PM
Please everyone respect the people who made this code if you plan on selling it to your buddy be resonable $7~$8 not $30 as rapid fire on the 360 is so simple it does not justify gouging people....
Title: Re: 12F683 HEX
Post by: redryno1221 on July 29, 2008, 07:52:14 PM
Thanx guys.
Title: Re: 12F683 HEX
Post by: thm ov3rkill on July 29, 2008, 07:56:46 PM
thanks guys alot i didint expect this what programmer would you guys reccomand for this.
also i really think poeple out there will use this to sell 20 dollar kits on ebay giving them a unfair atvantage when they never did anything.
Title: Re: 12F683 HEX
Post by: Whazup on July 30, 2008, 05:35:55 AM
Thanks man! Do you need resistors or only microchip and wire? For USA ppl here you can buy the pic12f863 :
whats a good cheap programmer to write this code to the chip.
I used this one http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141 (http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=3141)
Title: Re: 12F683 HEX
Post by: Ack Like You Know on July 30, 2008, 12:53:57 PM
If wired right, will this work the same as the sleeper or is the sleeper a whole different hex?
Title: Re: 12F683 HEX
Post by: redryno1221 on July 30, 2008, 12:55:32 PM
If wired right, will this work the same as the sleeper or is the sleeper a whole different hex?
the sleeper is a whole different hex...
Title: Re: 12F683 HEX
Post by: bluedog on July 30, 2008, 01:11:10 PM
Is the 2 switches for rapid fire on two triggers? The wire goes from the chip to each switch and the middle pin of both triggers? Mind me for asking, but what's the hex if we want to switch from off to single rapid fire to dual rapid fire through the triggers? You'd cycle through the options by using a momentary tact switch.
Title: Re: 12F683 HEX
Post by: thm ov3rkill on July 30, 2008, 02:17:54 PM
is this tested and confirmed working?
Title: Re: 12F683 HEX
Post by: Porkyfied on July 30, 2008, 02:30:46 PM
there every one happy there is the wiring Digrams for one or 2 swtichs This works on both Type of Controller Old and New Style Wireless no resister needed I tested on both wireless so please test it on wire one and let me know.
i just tied it on a wired controller and followed the diagram and the controller would not swith on and then the chip started burning and went very hot.
hope this helps and will be awaiting your reply
Title: Re: 12F683 HEX
Post by: Nemesis on July 30, 2008, 02:42:15 PM
i just tied it on a wired controller and followed the diagram and the controller would not swith on and then the chip started burning and went very hot.
hope this helps and will be awaiting your reply
sure you didn't confuse pin 1 with pin 8? its very easy to get them confused when its in "dead bug" position, as in upside down. i should know, happened to me
Title: Re: 12F683 HEX
Post by: Porkyfied on July 30, 2008, 04:10:38 PM
sure you didn't confuse pin 1 with pin 8? its very easy to get them confused when its in "dead bug" position, as in upside down. i should know, happened to me
ive just tried again same results so i swaped pins 1 and 8 over and put pin 5 on the other side then it shoots 1 shot and keeps jumping towards 4 o'clock untill i press RT them it rapid fires
any ideas?
Title: Re: 12F683 HEX
Post by: thm ov3rkill on July 30, 2008, 04:20:52 PM
guys is this working well with wirless controllors?
Title: Re: 12F683 HEX
Post by: KingMike_OS on July 30, 2008, 05:58:23 PM
i tested this code on both type of Wireless controller old and new the video is a old style controller with 2 switch ... the key word is wireless i don't like wire controllers and will not buy one now you can send me one to get it to work, sure.
but i think the 5v on wire controller may be too much .. should put a 100K on a power and sould work
Quote
i just tied it on a wired controller and followed the diagram and the controller would not swith on and then the chip started burning and went very hot.
Try putting a 100k radio shack part # 271-1347. also the rapid fire should only fire when the switch is press not the trigger. the switch don't turn the mod on/off.
Title: Re: 12F683 HEX
Post by: thm ov3rkill on July 30, 2008, 07:17:06 PM
kinf mike if you dont mind me asking whats a good cheap programmer i saw on called jdm it was around 13.95im looking for one in between 10-25 bucks?
Title: Re: 12F683 HEX
Post by: thm ov3rkill on July 30, 2008, 07:45:14 PM
mike what did you use to write the code what program?
Title: Re: 12F683 HEX
Post by: KingMike_OS on July 30, 2008, 11:52:13 PM
ill buy the cheap programmer from there but do i need a serial cable to connect that to? because i see like a thing sticking out for power.
well the sparkfun programmer, the white thing is power i think and the metle thing is to hook up to a moniter i think? lol
Caution: The programmer may not work with low power serial interfaces - i.e. laptop or notebook serial ports. USB to serial cables have also not been proven to work.
Title: Re: 12F683 HEX
Post by: OpTiCz on August 01, 2008, 07:09:31 AM
This worked very well for me. I'm on the old school Wireless Board.
Title: Re: 12F683 HEX
Post by: Ack Like You Know on August 01, 2008, 10:12:54 AM
Quick question on this. Say I wanted to have 2 separate buttons, one for each trigger. I see you have a wire going from pin 5 to the button and then a wire from the other side of the button to the middle pin for the Right trigger. Would it be at all possible to wire two wires from the pin 5 and have the second wire go to a button on the left with a wire coming from the left button to the Left trigger middle point? Would that work or would it just cause the right button to fire? Let me know as I'm about to pursue the install. Thanks
Title: Re: 12F683 HEX
Post by: OpTiCz on August 01, 2008, 11:25:50 AM
That's what it shows in the diagram. Power pin 1, ground pin 8, then pin 5 sends a constant rapid signal. You could probably hook up any button on the controller to pin 5 for rapid fire. I really wish spitfire worked, it would be even more cool to use the switch to enable burst, full auto, or off.
Title: Re: 12F683 HEX
Post by: Ack Like You Know on August 01, 2008, 12:02:53 PM
Right, but what I want to know is if I could have both right and left triggers function as rapid fire through two different R and L buttons attached to the controller. I want 2 outputs to come from pin 5 to go to 2 different triggers. The way he has done it in his video is that the two buttons both fire the right trigger.
Title: Re: 12F683 HEX
Post by: SYSTEM aka (Cyberpyrot) on August 01, 2008, 01:41:48 PM
Right, but what I want to know is if I could have both right and left triggers function as rapid fire through two different R and L buttons attached to the controller. I want 2 outputs to come from pin 5 to go to 2 different triggers. The way he has done it in his video is that the two buttons both fire the right trigger.
yes
Title: Re: 12F683 HEX
Post by: OpTiCz on August 01, 2008, 02:29:44 PM
I didn't even notice. I have two switched connected to pin 5. Each switch goes to a different middle pin. Works great.
Title: Re: 12F683 HEX
Post by: Ack Like You Know on August 01, 2008, 05:20:32 PM
i can't download this file. Something wrong with it?
Title: Re: 12F683 HEX
Post by: SYSTEM aka (Cyberpyrot) on August 01, 2008, 05:58:00 PM
i can't download this file. Something wrong with it?
king mike changed the file name I will ask him why later..
Title: Re: 12F683 HEX
Post by: IDontGetHowtoWire on August 01, 2008, 06:21:44 PM
Can't download says 404 :confused: that sucks.
Title: Re: 12F683 HEX
Post by: KingMike_OS on August 01, 2008, 06:37:15 PM
Download fix .. was updating the code.
sorry
Title: Re: 12F683 HEX
Post by: thm ov3rkill on August 01, 2008, 07:20:23 PM
kin mike the rpogrammer from spark fun do i need any speical cable sor is a seril cable just what ill need?>
Title: Re: 12F683 HEX
Post by: OpTiCz on August 01, 2008, 09:24:23 PM
Something is goofy. I have power on pin 1, Ground on pin 8, and two switches connected to pin 5. The other side of each switch is connected to the middle pin from the triggers; left switch on left trigger, right switch on right trigger. The right trigger works dandy. The left trigger seems to do a number of things. Fire the right trigger, fire the left trigger, and possibly D pad down.
Do I have a short somewhere?
Title: Re: 12F683 HEX
Post by: KingMike_OS on August 01, 2008, 11:31:39 PM
you can't wire any thing to left trigger this code only work on once side trigger right only
to have 2 switches install them bot to the right side like the frist switch and you have rapid
Fire on both switches.
I don't know where you got left trigger as i show in the digrams there is nothing hook up to it.
Title: Re: 12F683 HEX
Post by: thm ov3rkill on August 02, 2008, 06:52:13 AM
king mike so i have to buy the specal serial cable to sparkfun programmer
Title: Re: 12F683 HEX
Post by: IDontGetHowtoWire on August 02, 2008, 12:59:19 PM
Is this HEX the one with the 1000 use limit or something like that. Just want to know so I can add an IC Socket.
yes.
Title: Re: 12F683 HEX
Post by: thm ov3rkill on August 12, 2008, 06:19:02 AM
for the jdm programmer on sparkfun do i need a speical seril cable?
Title: Re: 12F683 HEX
Post by: Hazer on August 12, 2008, 04:25:45 PM
You need a full 9 pin straight through cable. Some cheap RS232 cables only have 3 pins connected from end to end.
Title: Re: 12F683 HEX
Post by: *user* on August 12, 2008, 08:27:09 PM
as i wait for my sleepers to come i'm going to play with this.
i have 4 chips here and my jdm i went to radio shack at like 8pm and bought to big of a switch. i rechecked there site for the one that i should have bought its : http://www.radioshack.com/product/index.jsp?productId=3060978
i have a wireless and a wired controller i can test on. did any one get it working on a wired controller ?
i poped open a wireless and its a old board martix looks simple to install going to flash the chip in the morning and test it out.
what is this about 1000 limit ?
Title: Re: 12F683 HEX
Post by: *user* on August 13, 2008, 12:59:53 PM
well like i said in my other post as i'm waiting for my sleeper chips to come i had some pics laying around i tested the code here on a wireless old style board works flawless. i went to radio shack this morning and bought these http://www.radioshack.com/product/index.jsp?productId=3014504&cp= comes with 4 tacts and worked well
i have tested with GTA AK47 OH MY GOD :) 6 stars within about 1 min 15 sec crazyness
Title: Re: 12F683 HEX
Post by: Whazup on August 26, 2008, 06:40:30 AM
What is the 1000 use limit? Use 1000 times rapidfire, download file 1000 times, install it on max. 1000 pic's? or something else¿¿¿¿
Title: Re: 12F683 HEX
Post by: wilson08 on August 26, 2008, 02:01:30 PM
What is the 1000 use limit? Use 1000 times rapidfire, download file 1000 times, install it on max. 1000 pic's? or something else¿¿¿¿
It means 1000 times you can use rapidfire - The limit is only on the free downloadable hex, the PIC's on "wiredinput" (shop) Have no limit.
Title: Re: 12F683 HEX
Post by: bill16504 on August 26, 2008, 03:36:29 PM
Right. So people using this free hex would be better off installing a socket in their controller. Or better yet, just buy your pics from WiredInput. Those guys are great and chips are cheap.
Title: Re: 12F683 HEX
Post by: Whazup on August 26, 2008, 11:47:49 PM
That sucks :faint:
I have it already installed on my controller. Maybe wait for new code and reprogram it
Title: Re: 12F683 HEX
Post by: bill16504 on August 27, 2008, 12:35:28 PM
I have it already installed on my controller. Maybe wait for new code and reprogram it
Or just use it to its limit then reprogram it. That's why it's good to have a socket installed. Mike released this code for free, so we don't have the right to complain. Like he said, the reason for the limit on the free code is to keep people from taking his work and making money off it. You can't blame him for that. Obviously people using this code have their own programmers, so reprogramming the chip each time it hits the 1000 use limit would be quite easy.
But people taking this free code and selling controllers with it will run in to problems once they hit their limit.
Title: Re: 12F683 HEX
Post by: hogs93 on October 30, 2008, 08:07:51 PM
how many times can you use this hex?
Title: Re: 12F683 HEX
Post by: hogs93 on October 30, 2008, 08:10:45 PM
can someone email me a guide at where to install and how to install the pic to the controller? does it need resistors>?
Title: Re: 12F683 HEX
Post by: hogs93 on October 30, 2008, 08:13:52 PM
hey king mike you are obviously very good at this. can you show me a guide on where to solder with this hex? thanks man
Title: Re: 12F683 HEX
Post by: bill16504 on October 31, 2008, 05:28:18 AM
It has a 1000 use limit.
Title: Re: 12F683 HEX
Post by: KingMike_OS on October 31, 2008, 05:49:39 AM