Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
I used super glue (dont ask) one time to glue down a flex board on a 360 mobo. The glue tube had a leak in the edge so when I squeezed it, the glue came out the tip, but also came out the side. I held the flex board in place with the same hand, blowing on it to dry faster and ended up gluing two fingers together and to the mobo.
Didn't take the thumbsticks off to re-solder my power wire the other day, I had my face inches from the board so I could see better (too lazy to get my magnifier from downstairs), started wondering why I was smelling some nasty , got a crescent taken out the side.
I tried to glue some electronics to an xbox360 controller motherboard with JB weld....well lets say it didn't work and I learned JB weld conducts electricity pretty fast lol.
Drinking and Dremeling...never a good idea to begin with. However holding your work piece in one hand, dremel in the other with a fiber cutwheel through plastic...well it binds. And when it binds, it releases with strong skip and will skip right across the back of your fingers, making a beautiful line across all it comes into contact with. In this case 3 fingers have a nice in-line scar which is a fun story to tell of stupidity.