Author Topic: 3 mode adjustable with jitter mode..updated 06/10/10 (Read 37568 times)

robbo3 · « **Reply #60 on:** October 06, 2010, 07:44:49 AM »

Quote from: lovey on October 06, 2010, 07:38:06 AM

new not working bruv i am useing v2 at the mo just did the up date and

nothing at all is working?

lovey · « **Reply #61 on:** October 06, 2010, 07:55:15 AM »

no m8

robbo3 · « **Reply #62 on:** October 06, 2010, 07:56:13 AM »

Quote from: lovey on October 06, 2010, 07:55:15 AM

no m8

LT and sync to turn it on ?

lovey · « **Reply #63 on:** October 06, 2010, 08:21:40 AM »

just done it all again m8 still no luck

robbo3 · « **Reply #64 on:** October 06, 2010, 08:25:46 AM »

Quote from: lovey on October 06, 2010, 08:21:40 AM

just done it all again m8 still no luck

are you wiring pin 4 to anything?

lovey · « **Reply #65 on:** October 06, 2010, 08:39:33 AM »

bruv i am very sorry i had a cut in my wire feel like a right t@@@ now, any way wow working very nice m8

sorry for messing u around m8 thanks for all your hard work.

Anonamous · « **Reply #66 on:** October 06, 2010, 01:31:52 PM »

Sweet, thx for that bug fix robbo

I like the LT+Sync to turn on lol. At first I was bugging out because I couldnt turn it on. I was checkin my connections like crazy and everything lol.

Post Merge: October 07, 2010, 12:23:24 PM

with the new jitter V3 the third mode has a slow set fire rate that doesnt get adjusted even after going into programming mode

robbo3 · « **Reply #67 on:** October 08, 2010, 04:30:32 AM »

Quote from: Anonamous on October 06, 2010, 01:31:52 PM

Sweet, thx for that bug fix robbo

I like the LT+Sync to turn on lol. At first I was bugging out because I couldnt turn it on. I was checkin my connections like crazy and everything lol.
Post Merge: October 07, 2010, 12:23:24 PM
with the new jitter V3 the third mode has a slow set fire rate that doesnt get adjusted even after going into programming mode

just tested the NEW 3 mode with jitter,mode 3 is pre set at 9.2 sps and i can adjust it up and down

Me47 · « **Reply #68 on:** October 11, 2010, 12:46:18 PM »

Wheres the Y Trace on CG1 and CG2?

pace1958 · « **Reply #69 on:** October 29, 2010, 04:05:35 AM »

Hi everyone I am new to this, What is the best hex file so far for the CG controller ?

platanomangu · « **Reply #70 on:** December 02, 2010, 11:34:59 PM »

can somebody help me how to do it...i bought two from ebay for 20 dollars each when i can do it my own i have a pic programer thank hope a answer

triggerhappy · « **Reply #71 on:** December 22, 2010, 03:00:50 PM »

ok why is it not turning on i have done this diagram 2 times all my wiring is correct
and still no luck Ahhhhhh what am i doing wrong

Famas · « **Reply #72 on:** December 22, 2010, 03:48:38 PM »

lt + sync to turn on

Suprmacdaddy · « **Reply #73 on:** January 06, 2011, 08:35:24 AM »

Hey whats the latest version and install? or at least the best version and the install? thanks

Famas · « **Reply #74 on:** January 06, 2011, 09:01:35 AM »

they all work the same just the new version is lt + sync to turn on

phil789 · « **Reply #75 on:** January 08, 2011, 06:45:39 AM »

Hi, in the diagrams there is a 1k res what voltage should this be also the 330 OHMS res.. many thanks from a newbie

Famas · « **Reply #76 on:** January 08, 2011, 06:50:25 AM »

the pics are 100 percent correct just follow them

phil789 · « **Reply #77 on:** January 08, 2011, 07:03:58 AM »

Hi, i know the pics are good! i was asking what is the voltage used! in the 1K / 330 OHM res... ??? 1/2 1 5 10 WATTS

Famas · « **Reply #78 on:** January 08, 2011, 07:05:03 AM »

them are the resistor resistance the voltage comes form the xbox 360 pad

hyper999 · « **Reply #79 on:** January 08, 2011, 07:18:34 AM »

@famas he does not actually mean the voltage he means the wattage

@phil you want 1/4 watt

phil789 · « **Reply #80 on:** January 08, 2011, 07:22:14 AM »

many many thanks

Famas · « **Reply #81 on:** January 08, 2011, 07:30:10 AM »

oh sorry yes it 1/4 watt they sell 100 for a pound from phenoptix sorry just miss under stood

phil789 · « **Reply #82 on:** January 08, 2011, 07:31:28 AM »

its ok i should have explained myself better! but i'm a newbie.. i have ordered from ebay! now...

gadget78 · « **Reply #83 on:** January 09, 2011, 05:42:23 PM »

just updated some of me older controllers ..

just wanted to clarify some stuffs...
whats the dif (apart from the mode placement) of GP JITTER V1, and the NEW 3 mode with jitter ?

also wanted to add, for all the matrix posts, yes this does work, but you have to use a additinal chip to get it to switch teh Y properly (i posted the way i did it in a few threads back ages ago !)

Famas · « **Reply #84 on:** January 10, 2011, 02:26:19 AM »

the new code is lt + sync to switch on better code but couple of bugs on it like the adjusting part

steve666666 · « **Reply #85 on:** January 14, 2011, 10:27:45 AM »

hi anyone now how to install the new 3 mode jitter to matrix board
many thanks

Famas · « **Reply #86 on:** January 14, 2011, 10:59:31 AM »

cg only atm there was a guy earlier that found a way couple of posts up please ask him and post result so i can test a make a diagram thankyou

gadget78 · « **Reply #87 on:** January 16, 2011, 06:48:05 AM »

ive got it installed in a Matrix...
here is my original post about how i did it (with the componants i had laying around !! )

https://www.acidmods.com/forum/index.php/topic,35810.msg271133.html#msg271133

i expect you may be able to use a opto coupler instead ?
(which is something you may have, as its something you have to use in the newer controllers anyhows)

yes the newer code is good for the people with one button, ive been using the GP JITTER V1 as i have two extra buttons fitted

will have to compare the code etc ...

Famas · « **Reply #88 on:** January 16, 2011, 07:17:17 AM »

there a new code called robbo 2011 3 mode jitter its in the free code list relesed about 3 days ago

jozecuervoo · « **Reply #89 on:** September 07, 2012, 02:41:00 PM »

Hey guys, i have a problem with the rbo adjust 2, i have a new matrix board controller and i just can´t make it work, i installed it like bmu3 matrix, i used 2 330 ohms resistors, 1 diode 1n4148 and a 1k omh resistor.
It works fine with the mode 2 and 3 but mode 1 shoot with the right trigger both pistols(akimbo), when i change the sps of that mode to 23sps the left trigger doesn´t work, can anybody show me the diagram of instalation in a new matrix board please?

Excuse my english, i´m Mexican

News:

Author Topic: 3 mode adjustable with jitter mode..updated 06/10/10 (Read 37568 times)