Author Topic: oVER Cl0cK (Read 6895 times)

techninjadude · « **on:** January 31, 2011, 07:53:38 AM »

Can you over clock the psp higher that 333MHZ

galaxy3arth · « **Reply #1 on:** January 31, 2011, 08:45:30 AM »

yes ,but nobody has done it so far with out harming there psp.
as in they killed it.
I beleive the person got up to a stable 433mhz might have been more
the problem is it needs a good cooling system.

techninjadude · « **Reply #2 on:** January 31, 2011, 12:01:01 PM »

Thats Not a problem. Just do a Cooling Mod. I was gonna do one, But there is no point

Famas · « **Reply #3 on:** January 31, 2011, 12:15:33 PM »

why would you want to do this what does it achieve

hyper999 · « **Reply #4 on:** January 31, 2011, 02:14:24 PM »

Quote from: Famas on January 31, 2011, 12:15:33 PM

why would you want to do this what does it achieve

it increases the cpu speed, so you get things like quicker load times but it will require extra cooling

techninjadude · « **Reply #5 on:** January 31, 2011, 03:12:34 PM »

Quote from: hyper999 on January 31, 2011, 02:14:24 PM

it increases the cpu speed, so you get things like quicker load times but it will require extra cooling

Thats what i want, i opened this topic to share our ideas

Famas · « **Reply #6 on:** January 31, 2011, 03:15:59 PM »

hyper how would you do this could i do it to a 360

hyper999 · « **Reply #7 on:** January 31, 2011, 03:42:08 PM »

I have no idea how on a psp (not my thing) and on a 360 im pretty sure it's never been done and is probably near impossible to do.

crazy-modder · « **Reply #8 on:** January 31, 2011, 04:36:59 PM »

lol i bet if you could overclock a 360, it would get the RROD just by looking at it.

jacobia jacob · « **Reply #9 on:** January 31, 2011, 04:50:36 PM »

the 360 has cooling issues as it is. even my slim 360 seems to pump so much hot air out the side vent it amazes me the thing doesn't melt or warp.

i suppose you could put a small fan in the umd door to help cool a psp if you managed to allow space for airflow through the components (i remember there being barely any room between the parts), but i'm not sure about how you could go about powering it.

GhoSt · « **Reply #10 on:** January 31, 2011, 05:16:15 PM »

just to clarify things, 333mhz is not an overclock that is the stock speed of the psp processor, sony uses speeds below 333 to reduce the power consumption. If someone managed to pull off a stable OC with safe temperatures the problem would still arise that the psp battery would be drained very quickly.

I do remember seeing some videos on youtube a while back (real?), maybe you should check them out.

techninjadude · « **Reply #11 on:** February 01, 2011, 07:37:34 AM »

Yeah. There is a homebrew app to over clock it. And it bricks if you do it higher than 460 Mhz

galaxy3arth · « **Reply #12 on:** February 01, 2011, 09:01:59 AM »

oh so inorder to cool it with out good air flow you could create a sort of mini freon system.
or maybe if you took the umd out and cut the sides out then a fan could be installed in the umd and it could get the neccesary air flow.

inorder to create a good cooling system you have to know the over clock you want it at so that somebody can try it and give us a temperature reading.

then we can start from there.

I would say 433 would be good to start with.

as far as battery goes just use a more effitient battery or use 2.

techninjadude · « **Reply #13 on:** February 01, 2011, 09:24:02 AM »

Yeah thats troo . I was gonna do da mod but I gave up. I took out the umd drive like you said and wanted to solder the fan to a power source with a switch. I got the fan from this netbook cooler from the 99P store Which in America is the 99 cent store.

I realised there is no point overclocking, for faster features, I mean Seriously what do I need faster with a piece of junk. I only use it for gaming in bed and sum Music. I'm Waiting for the ngp and I will get it when It comes out.

galaxy3arth · « **Reply #14 on:** February 02, 2011, 08:20:14 AM »

I agree entirely.
no need to overclock or any thing.
NGP!!

1TONpete · « **Reply #15 on:** February 05, 2011, 06:37:46 AM »

Here's the thing. The psp is passively cooled. There is no heat sinks. you would need to add a heat sink to dissipate the heat. The fan would just need to blow on the heat sink. Aircooling needs a heat sink. I have some small ones, very low profile. This might be a help with the N64 emulator. It has improved much over the years but i still can't play "Goldeneye". Well I can but its like supper slow mode. AS far as power just plug it in. Just dont over clock portable.
AS far as overclocking an xbox360 it is very possible , I did a liquid cooled box for someone a couple years ago. I think they sell kits for it now.

hyper999 · « **Reply #16 on:** February 05, 2011, 04:34:04 PM »

water cooling is not overclocking... the cooling of an xbox 360 is easy, over clocking it is not.

1TONpete · « **Reply #17 on:** February 05, 2011, 06:54:12 PM »

I was just saying that its possible to do without over heating due to liquid cooling.

jacobia jacob · « **Reply #18 on:** February 05, 2011, 07:20:07 PM »

yea, but the software aspect is probably near impossible.

GhoSt · « **Reply #19 on:** February 05, 2011, 08:04:42 PM »

Screw software, you can go old school and hardware overclock by manually controlling higher voltages

(I don't recommended doing this under any circumstances)

techninjadude · « **Reply #20 on:** February 06, 2011, 03:29:50 AM »

LOL. Il just put a battery and connect it to the CPU lol

galaxy3arth · « **Reply #21 on:** February 07, 2011, 09:08:33 AM »

so simple.

jacobia jacob · « **Reply #22 on:** February 07, 2011, 11:30:26 AM »

i don't think so tim.

HiddenVenom · « **Reply #23 on:** February 07, 2011, 11:55:48 AM »

Hmm. That will produce an interesting output of 1111111111111111111111111111111111111111111111111111111111111111111.

hyper999 · « **Reply #24 on:** February 07, 2011, 12:47:38 PM »

^ LOL

jacobia jacob · « **Reply #25 on:** February 07, 2011, 12:50:06 PM »

what you really need to do is remove all the fans and heatsinks from the xbox. that way, the heat will expand the metal in the motherboard and force more electricity through it, thus forcing more electricity through the cpu. once the components expand, the reduced density should allow heat to disperse on its own before the console hits rrod stage, thus allowing stable gameplay with better fps. no software involved, OC via heat.
/derp

galaxy3arth · « **Reply #26 on:** February 08, 2011, 08:23:22 AM »

sounds risky.

HiddenVenom · « **Reply #27 on:** February 08, 2011, 08:26:37 AM »

Except Ohm's law state that resistance increases proportionate to temperature. More surface area does equal a larger cooling effect, I'll give you that, but not so effective when the console is cooking itself. Heat does not push electrons, it interferes with them.
DERP.

However if you put an egg sandwich in you might get a decent lunch out of it.

jacobia jacob · « **Reply #28 on:** February 08, 2011, 12:00:04 PM »

maybe i should have said /sarcasm...

eggs are better scrambled.

HiddenVenom · « **Reply #29 on:** February 08, 2011, 01:23:49 PM »

If it explodes you might just find yourself lucky.

/humorous deviation

I think you could overclock a PSP, but is it actually that worth it? At best, you're adding a third to the power but at the same time have at least four third ad much power draw and heat generation.

News:

Author Topic: oVER Cl0cK (Read 6895 times)

techninjadude

techninjadude

techninjadude

techninjadude

techninjadude

techninjadude