Author Topic: #2878 X- Reaper[WIP]/ Sound activated Led Controller Finished (Read 22076 times)

Rodent · « **on:** January 13, 2012, 05:39:47 PM »

#2878 MOD OFF ENTRY

Will post pics soon, This will be Console and Controller together!

2/8/2012

2/9/2012 kool- runner installed fingers crossed hope it bootz

2/11/2012
after hours of messing with this broken slim the dvd drive didn't work when i got it and would just power on.. was able to fix the dvd drive. and got the cool-runner working.. this was my first attemt at a RGH...and it works. boot time not to bad either
Video - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting

2/13/2012

2/13/2012 Boot up time
Video - TinyPic - Free Image Hosting, Photo Sharing & Video Hosting
2/13/2012 New Reaper dashboard

Controller shells undecided ????

I need to borrow another crayon from Melted Crayon mines wearing out

PsychoticWolf · « **Reply #1 on:** February 10, 2012, 09:20:50 PM »

This looks like its gonna be good. I am gonna keep an eye out on this one. Also If you need Crayons Try the BST im sure someone can help you.

snowcolt17 · « **Reply #2 on:** February 11, 2012, 09:35:19 AM »

i might have a few colored pencils.. looks interesting

rafaliyo86 · « **Reply #3 on:** February 12, 2012, 11:19:03 AM »

looks good!!! how did you change led ROL?

Rodent · « **Reply #4 on:** February 12, 2012, 11:29:56 AM »

Thanks guys for the veiws, and comments. being this is the first xbox 360 mod i ever done. its very challenging and trying to think of things to do and where to put the stuff is impossible to think it out a head of time.

Here is what i went buy to change the ROL.. but once you take a slim apart you can see its very simple to do, just like changing the ROL leds on a controller just have to be careful and follow the instructions here

https://www.acidmods.com/forum/index.php/topic,40562.0.html

Rodent · « **Reply #5 on:** February 12, 2012, 02:01:08 PM »

Quote from: 2878 on February 12, 2012, 11:29:56 AM

Thanks guys for the veiws, and comments. being this is the first xbox 360 mod i ever done.

Congrates On your first xbox 360 mod. also congrates on your first rgh mod... can't wait to see this completed . Good job and good luck in the mod off!

Rodent · « **Reply #6 on:** February 12, 2012, 03:31:18 PM »

Thanks Rodent ...means alot from you I have seen your work .. also updated pics

snowcolt17 · « **Reply #7 on:** February 12, 2012, 03:40:55 PM »

.... tv looks like a dos computer..

looking good for first mod

PsychoticWolf · « **Reply #8 on:** February 12, 2012, 08:17:14 PM »

damn that is looking awesome. Question what does the Cool runner do? and what are those other boxes?

snowcolt17 · « **Reply #9 on:** February 12, 2012, 08:31:32 PM »

Quote from: PsychoticWolf on February 12, 2012, 08:17:14 PM

damn that is looking awesome. Question what does the Cool runner do? and what are those other boxes?

the cool runner is the chip used to "glitch" the console.
the other box is a nandx. it is used for flashing the nand and programming the coolrunner.

as for the anything i missed. i dunno :p.

PsychoticWolf · « **Reply #10 on:** February 13, 2012, 01:20:27 PM »

Quote from: snowcolt17 on February 12, 2012, 08:31:32 PM

the cool runner is the chip used to "glitch" the console.
the other box is a nandx. it is used for flashing the nand and programming the coolrunner.

as for the anything i missed. i dunno :p.

I see looks pretty good. I thought it was a way to control the fan or something with the name like that.

snowcolt17 · « **Reply #11 on:** February 13, 2012, 01:23:21 PM »

dude. i like the new pics!! how did you do that?? looks good. going to keep watching this one. cant wait for the outcome

Aggressive Mods · « **Reply #12 on:** February 13, 2012, 04:46:59 PM »

Dude that plexi glass engravement or whatever you did is SICK good luck!

Rodent · « **Reply #13 on:** February 13, 2012, 05:49:07 PM »

updates ^^ 2/11/12-2/13/2012

Rodent · « **Reply #14 on:** March 04, 2012, 12:32:32 AM »

I have come to a holt in my project X-Reaper... the Mod i and trying to do just doesn't have enough room in the controller to pull off the ultimate controller mod...The object of having it all in the controller and working, Seems to be impossible to do, and limited space to make this ultimate controller .Also to get the full affect of what I am trying to do. With todays technology, I thought it would be very simple process to put it all in the controller and make this work, (NOT GIVING UP ON THE IDEA) just Not alot of room to put all in such a small place and have the controller fully operation. but we will see what happens and hopefully figure this out.

This is the reason why i haven't done anything in quite sometime now , totally trying to map this out and make it fully fuctional and trying to keep the rumblers intact still and with out hacking the controller case all to peices. In other words keeping the parts all inside and keeping the controller stock looking.

Thx members for all the comments. Hope to update again soon, Time is running short and the controller has had me stumped for a long time now...been in my mind for a long time and with me thinking of making this , didn't think it would be as hard as it has become.

Anonamous · « **Reply #15 on:** March 04, 2012, 06:00:23 AM »

Quote from: 2878 on March 04, 2012, 12:32:32 AM

I have come to a holt in my project X-Reaper... the Mod i and trying to do just doesn't have enough room in the controller to pull off the ultimate controller mod...The object of having it all in the controller and working, Seems to be impossible to do, and limited space to make this ultimate controller .Also to get the full affect of what I am trying to do. With todays technology, I thought it would be very simple process to put it all in the controller and make this work, (NOT GIVING UP ON THE IDEA) just Not alot of room to put all in such a small place and have the controller fully operation. but we will see what happens and hopefully figure this out.

This is the reason why i haven't done anything in quite sometime now , totally trying to map this out and make it fully fuctional and trying to keep the rumblers intact still and with out hacking the controller case all to peices. In other words keeping the parts all inside and keeping the controller stock looking.

Thx members for all the comments. Hope to update again soon, Time is running short and the controller has had me stumped for a long time now...been in my mind for a long time and with me thinking of making this , didn't think it would be as hard as it has become.

I am unsure if we are allowed to give suggestions that would help. So, until I am told it is ok to give you advice on how to make something that is big, a lot smaller, I won't tell you lol.

Rodent · « **Reply #16 on:** March 04, 2012, 08:47:18 AM »

I am sure i can get it figured out.. yet just want the controller to stay stock looking all the way around.

Anonamous · « **Reply #17 on:** March 05, 2012, 06:07:14 AM »

Ok, so I got the go-ahead. So, what I suggest that you do to make it smaller is make an SMD layout of it in a cadsoft program such as eagle. You can then send the files to a pcb production company or whatever and they will etch the board for you. This can reduce the size of whatever you are putting together by at least 50% (it all depends on how close together you can put everything in the design)

Cookie Monster · « **Reply #18 on:** March 05, 2012, 06:16:23 AM »

you could file down the components abit i guess...

PsychoticWolf · « **Reply #19 on:** March 05, 2012, 10:26:22 PM »

If its for power you can cut back on size. get a Flat Li-ion Battery maybe

Rodent · « **Reply #20 on:** March 06, 2012, 02:59:36 AM »

Quote from: Anonamous on March 05, 2012, 06:07:14 AM

Ok, so I got the go-ahead. So, what I suggest that you do to make it smaller is make an SMD layout of it in a cadsoft program such as eagle. You can then send the files to a pcb production company or whatever and they will etch the board for you. This can reduce the size of whatever you are putting together by at least 50% (it all depends on how close together you can put everything in the design)

Thanks for the info, but what i am trying to do is already pretty small, also trying to get the parts to build another circuit board, for in the controller, (this may come down to where both circuit boards i built, still might not fit in the controller, I would like to keep the rumblers in tack if possible, but we will see what happens, also undecided on which controller shell to use, the blue one would give more affect on what i want to do yet the polished black one matches the console. Thanks for your help.

Quote from: Cookie Monster on March 05, 2012, 06:16:23 AM

you could file down the components abit i guess...

Thanks will look in to it.

Quote from: PsychoticWolf on March 05, 2012, 10:26:22 PM

If its for power you can cut back on size. get a Flat Li-ion Battery maybe

Not sure if it will be a power issue due to the smaller batteries I have found dont't take up that much space and they put out enough power to power the controller and the circuits boards i am building to and trying to compact everything in such a small place .... and keepng the controller looking stock from the outside. other then some tact switches ...

Rodent · « **Reply #21 on:** March 19, 2012, 08:45:02 AM »

Did some testing today, Really complicated, right, now, but I should have updates this week.

Rodent · « **Reply #22 on:** March 26, 2012, 05:12:07 AM »

uuuuuuuuuugggggggggggggggghhhh still struggling with my controller... doesn't want to work will post pics soon hope to finish on time now

Rodent · « **Reply #23 on:** March 28, 2012, 03:35:45 AM »

Maybe if you weren't so

y... with me I could help you out... but your more then welcome to hit me up if you need help.. or if you need anything just PM me.. and I will see if i can help you along.. Good luck really hoping to see this mod finished.

EDIT: PS NO HARD FEELINGS hahaha

Rodent · « **Reply #24 on:** March 28, 2012, 10:30:12 AM »

@ rodent.. didn't mean anything bad by it but you always seem to come out on top, with your mods and from what i tried to do , is to compete with the best , being my First RGH i thought i would be up there with crazy-modder and yourself rodent.

....was just haveing a tough time trying to make things work and yea if you could give me some help i would be appreciated..

sorry for calling you a pos but as Tracey even

Quote

I agree 100% with this statement!

so i am not the only one who thinks that of you :p

No harsh feelings going with the flow.. and if you can help let me know

Rodent · « **Reply #25 on:** March 29, 2012, 06:08:40 PM »

Its getting close , yet My controller mod will have to be put on hold... till a later date

just didnt go as well as it has planned but i will make sure that the controller gets done and is presented to acidmods

hopefully i can finish this console and will be impressive untill sunday night more pics revealed

Rodent · « **Reply #26 on:** April 01, 2012, 11:59:47 AM »

Well I been up all night working on this, thing is Dashboards up and running, but no ROL lights or power center lights, as for my controller making progresss... probably not going to be finished on time

Rodent · « **Reply #27 on:** April 01, 2012, 12:28:49 PM »

Slow motion, hard to keep it clean and make it work at the same time but here is a sneak peak of what i have done since 10 am this morning.

Rodent · « **Reply #28 on:** April 01, 2012, 01:04:54 PM »

Added capacitors and transistors.. nothing like having no room to do any work but its coming along

paintlax21 · « **Reply #29 on:** April 01, 2012, 01:49:32 PM »

Quote from: 2878 on April 01, 2012, 12:28:49 PM

Slow motion, hard to keep it clean and make it work at the same time but here is a sneak peak of what i have done since 10 am this morning.

Is that a tilt controller mod?

News:

Author Topic: #2878 X- Reaper[WIP]/ Sound activated Led Controller Finished (Read 22076 times)