Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62056 times)

F00 f00 · « **Reply #30 on:** January 06, 2007, 11:21:36 AM »

For those that might be interested

Wire chart from lft to right.

1.na
2.L2
3.L1
4.UP
5.LEFT
6.DOWN
7.RIGHT
8.This ones a bit wierd its not on mine
9.GROUND
10.SELECT
11.ANALOGE ON/OFF
12.START
13.SQUARE
14.X
15.O
16.TRIANGLE
17.R1
18.R2

I am fairly sure thats right. My controller however is the older version,
which is compleatly different. I only realized that after I finished the
list. Grrr. I'll do another for this one.

SYSTEM aka (Cyberpyrot) · « **Reply #31 on:** January 06, 2007, 11:24:23 AM »

Nice thats what I had

F00 f00 · « **Reply #32 on:** January 07, 2007, 02:52:04 AM »

Ok the pin out for the older controller is.

1. L2
2.L1
3.UP
4.LEFT
5.DOWN
6.RIGHT
7.GROUND
8.ANALOGE ON/OFF
9.SELECT
10.START
11.SQUARE
12.X
13.O
14.TRIANGLE
15.R1
16.R2

Its marked on the board 1 to 16 so you that should be easy to follow.

Off Topic .Thought you guys might like to see this pic. Thats what is required to install a mod chip. And I thought my mod was triky to solder . . .

[/img]

SYSTEM aka (Cyberpyrot) · « **Reply #33 on:** January 07, 2007, 07:30:12 AM »

man everyone loves magnet wire

F00 f00 · « **Reply #34 on:** January 07, 2007, 07:33:05 AM »

Quote from: cyberpyrot (Site Admin) on January 07, 2007, 07:30:12 AM

man everyone loves magnet wire

It actualy comes with the modchip kit. I only realy used it on my ps2 mod in the absence of anything else.

Update: I am wiring up the controller cable at the moment.

SYSTEM aka (Cyberpyrot) · « **Reply #35 on:** January 07, 2007, 07:40:48 AM »

Quote from: F00 f00 (R&D-Q&A) on January 07, 2007, 07:33:05 AM

It actualy comes with the modchip kit. I only realy used it in the absence of anything else.

Update: I am wiring up the controller cable at the moment.

sweet

F00 f00 · « **Reply #36 on:** January 10, 2007, 04:44:37 PM »

Ok this is important for any one modding a ps2 controller for the psp.

Obviosly you have to use the ground thats already on the pcb. But theres a problem. The right hand stick has to be modded with cybers a2d method. This causes a short because the analoge the ground is pin 1 and 1, and ont the modded stick its 2 and 2. So you have to cut ALL of the tracks conecting the ground to the main circit and all of the tracks between the 2 potentiometers on the right hand stick. Like so . . .

F00 f00 · « **Reply #37 on:** January 11, 2007, 05:14:46 AM »

Update. I have finished the ps2 controller rewire (I hope) it now has a 15pin socket in the back. Cant post any pics till tomorow as I killed my card reader for an unrelated mod. Grrr. Test in my conections now. I dont know how to test the left analoge without it being attatched to the psp though.

replicashooter · « **Reply #38 on:** January 11, 2007, 05:22:38 AM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 05:14:46 AM

Update. I have finished the ps2 controller rewire (I hope) it now has a 15pin socket in the back. Cant post any pics till tomorow as I killed my card reader for an unrelated mod. Grrr. Test in my conections now. I dont know how to test the left analoge without it being attatched to the psp though.

Nice, what are you using for the socket?

F00 f00 · « **Reply #39 on:** January 11, 2007, 05:35:30 AM »

D-Range 15-Way Plug from maplin. Its not pretty but its the bast I could fined. I'll try to find a wide bit of shrink rap to cover the plug, that should make it look a bit nicer.

Rewiring part of my cable at the mo.

SYSTEM aka (Cyberpyrot) · « **Reply #40 on:** January 11, 2007, 06:09:57 AM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 05:35:30 AM

D-Range 15-Way Plug from maplin. Its not pretty but its the bast I could fined. I'll try to find a wide bit of shrink rap to cover the plug, that should make it look a bit nicer.

Rewiring part of my cable at the mo.

I thought you where going to use mini usb? did you not recieve the package yet?

F00 f00 · « **Reply #41 on:** January 11, 2007, 06:15:27 AM »

Quote from: cyberpyrot (Site Admin) on January 11, 2007, 06:09:57 AM

I thought you where going to use mini usb? did you not recieve the package yet?

The cable I am making has a 15 pin on one end, it has 4 cables coming out on the end of those is the mini usb's. So the controller has a 15pin socket and the psp has 4 mini usb sockets. It could be done with 4 sepetate cables but I thought this way would be neater.

The package hasnt arrived. Its going to my work and I am not there till mon. So I am gona do everything but put the sockets in the psp now, then hopefully I caan put them in on mon.

SYSTEM aka (Cyberpyrot) · « **Reply #42 on:** January 11, 2007, 06:24:09 AM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 06:15:27 AM

The cable I am making has a 15 pin on one end, it has 4 cables coming out on the end of those is the mini usb's. So the controller has a 15pin socket and the psp has 4 mini usb sockets. It could be done with 4 sepetate cables but I thought this way would be neater.

The package hasnt arrived. Its going to my work and I am not there till mon. So I am gona do everything but put the sockets in the psp now, then hopefully I caan put them in on mon.

ok man keep us posted

F00 f00 · « **Reply #43 on:** January 11, 2007, 06:31:31 AM »

Quote from: cyberpyrot (Site Admin) on January 11, 2007, 06:24:09 AM

ok man keep us posted

I just remembered. I didnt make the cable that way because its neeter. I did because I wanted to be able to plug other controllers into the 15pin cable and not have to make all my controllers with 4 cables. Not that it matters but there you go.

F00 f00 · « **Reply #44 on:** January 11, 2007, 08:43:56 AM »

Update. All the buttons work. But the right stick dosent. I am gona check my wiring but I think its the way I moded it. I have a few more so I'll just do another.

Edit: It was a bit of both. I am gona have to take this one out and put another in. bum

EDIT2: Fixwd it. I now have a socket on my ps2 controller that conects to all buttons and both sticks. I rule!

SYSTEM aka (Cyberpyrot) · « **Reply #45 on:** January 11, 2007, 11:43:55 AM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 08:43:56 AM

Update. All the buttons work. But the right stick dosent. I am gona check my wiring but I think its the way I moded it. I have a few more so I'll just do another.

Edit: It was a bit of both. I am gona have to take this one out and put another in. bum

EDIT2: Fixwd it. I now have a socket on my ps2 controller that conects to all buttons and both sticks. I rule!

post som video please

F00 f00 · « **Reply #46 on:** January 11, 2007, 11:51:44 AM »

Quote from: cyberpyrot (Site Admin) on January 11, 2007, 11:43:55 AM

post som video please

I think your getting the wrong idea. What I have is a ps2 controller with a socket in. I've tested all the buttons with a multimeter, not on the psp. Also I cant upload anything till I get a new card reader. It looks pretty cool. But I wont know if it actualy works till I get it wired to the psp.
I'll do that tomorow. I am to tired to solder now.

Also I have one problem thats bugin me. The hardest part was wireing the dpad on the psp. One of the conections isnt very good and sometimes stops working. Its fine as long as I dont touch it to much though. Does anyone know a good way to get hot glue off if it comes to that??

SYSTEM aka (Cyberpyrot) · « **Reply #47 on:** January 11, 2007, 11:55:47 AM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 11:51:44 AM

I think your getting the wrong idea. What I have is a ps2 controller with a socket in. I've tested all the buttons with a multimeter, not on the psp. Also I cant upload anything till I get a new card reader. It looks pretty cool. But I wont know if it actualy works till I get it wired to the psp.
I'll do that tomorow. I am to tired to solder now.

Also I have one problem thats bugin me. The hardest part was wireing the dpad on the psp. One of the conections isnt very good and sometimes stops working. Its fine as long as I dont touch it to much though. Does anyone know a good way to get hot glue off if it comes to that??

Blowdrier

F00 f00 · « **Reply #48 on:** January 11, 2007, 05:41:58 PM »

I've just been thinking abou the tutorial for this. Looking at the pics I have, its going to be pretty hard for some one to follow the wiring. I need to draw up a proper diagram. Can anyone recomend a good freeware program to do it with??

SYSTEM aka (Cyberpyrot) · « **Reply #49 on:** January 11, 2007, 05:44:38 PM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 05:41:58 PM

I've just been thinking abou the tutorial for this. Looking at the pics I have, its going to be pretty hard for some one to follow the wiring. I need to draw up a proper diagram. Can anyone recomend a good freeware program to do it with??

for circuit design?

F00 f00 · « **Reply #50 on:** January 11, 2007, 05:58:55 PM »

sort off. I am just trying to figute out the easyest way to explain what I've done. It was pretty tough to try to figurre out the best way to wire the plug. If other people are gona have a go at this I need to make it as simple as posible.

SYSTEM aka (Cyberpyrot) · « **Reply #51 on:** January 11, 2007, 06:00:08 PM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 05:58:55 PM

sort off. I am just trying to figute out the easyest way to explain what I've done. It was pretty tough to try to figurre out the best way to wire the plug. If other people are gona have a go at this I need to make it as simple as posible.

I posted a circuit designer program in R&D

F00 f00 · « **Reply #52 on:** January 11, 2007, 06:03:47 PM »

Cool, I'll have a go with that.

Btw I am runing a live 3v line to the controller too. Get some LED action going on in there.

SYSTEM aka (Cyberpyrot) · « **Reply #53 on:** January 11, 2007, 06:04:58 PM »

Quote from: F00 f00 (R&D-Q&A) on January 11, 2007, 06:03:47 PM

Cool, I'll have a go with that.

Btw I am runing a live 3v line to the controller too. Get some LED action going on in there.

awsome

F00 f00 · « **Reply #54 on:** January 12, 2007, 05:22:59 AM »

Ok heres a pic of the controller wireing. . .

replicashooter · « **Reply #55 on:** January 12, 2007, 05:30:51 AM »

Nice to see it all done, can you snap some more pics of the wiring and the PSP install?

Kudos on finishing off a project - All the way from idea to execution.

F00 f00 · « **Reply #56 on:** January 12, 2007, 05:38:08 AM »

Quote from: replicashooter (R&D) on January 12, 2007, 05:30:51 AM

Nice to see it all done, can you snap some more pics of the wiring and the PSP install?

Kudos on finishing off a project - All the way from idea to execution.

Hold on, its not finished yet. I am finishing the psp wiring at the moment (its only the easy stuff left), and I dont have my mini usb sockets yet (I am gona pop into work tomorow and see if they're there).

Heres another wireing pic

SYSTEM aka (Cyberpyrot) · « **Reply #57 on:** January 12, 2007, 06:01:26 AM »

Awsome

replicashooter · « **Reply #58 on:** January 12, 2007, 07:12:22 AM »

Busy trying to get hold of a white PSOne pad at the moment to match my ceramic console then I'll be starting on this mod.

Pyrot - I'm interested in the tilt mech, thanks for the offer. Can't reply to your PM as I have no idea how to get into the PM thing without the flashing 1 at the top

SYSTEM aka (Cyberpyrot) · « **Reply #59 on:** January 12, 2007, 07:16:31 AM »

Quote from: replicashooter (R&D) on January 12, 2007, 07:12:22 AM

Busy trying to get hold of a white PSOne pad at the moment to match my ceramic console then I'll be starting on this mod.

Pyrot - I'm interested in the tilt mech, thanks for the offer. Can't reply to your PM as I have no idea how to get into the PM thing without the flashing 1 at the top

you can enter your pm at the bottom of the main site

News:

Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62056 times)