Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62208 times)

F00 f00 · « **Reply #90 on:** January 13, 2007, 09:30:23 AM »

Man if you can get it to work that way it would be so good. I havent posted a pic of the socket yet because its just hanging out at the moment. I want to make sure that every thing works befor finishing it up.

bte that controller looks pimp. Are you still doing the tv out thing?

replicashooter · « **Reply #91 on:** January 13, 2007, 09:38:36 AM »

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 09:30:23 AM

bte that controller looks pimp. Are you still doing the tv out thing?

Yeah, but I still need those figures.

What I'm planning on doing is modding a PSP2TV first to get the raw signals out (plus its easier than fighting with the FPC) and the rolling from there. Don't want to spend the cash on a pointless PSP2TV unless the signals are within my expected ranges first.

How many wires do you have in total going from your PSP to pad?

Chaos · « **Reply #92 on:** January 13, 2007, 09:43:50 AM »

Very Nice Job On the PS2 controler with LED's

F00 f00 · « **Reply #93 on:** January 13, 2007, 09:46:02 AM »

Quote from: replicashooter (R&D) on January 13, 2007, 09:38:36 AM

Yeah, but I still need those figures.

What I'm planning on doing is modding a PSP2TV first to get the raw signals out (plus its easier than fighting with the FPC) and the rolling from there. Don't want to spend the cash on a pointless PSP2TV unless the signals are within my expected ranges first.

How many wires do you have in total going from your PSP to pad?

Now whos not reading the posts properly. I told you, 14, but I added another 3v for the led's so 15 in total. But If you mean cables, theres four, I could have done less but I quite like the idea of having 2 on ether side.

I think the problem with that psptv thing is that it has a huge block conector on it. I dont know if you'll be able to fit it in without using there ugle case.

SYSTEM aka (Cyberpyrot) · « **Reply #94 on:** January 13, 2007, 09:54:06 AM »

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 09:46:02 AM

Now whos not reading the posts properly. I told you, 14, but I added another 3v for the led's so 15 in total. But If you mean cables, theres four, I could have done less but I quite like the idea of having 2 on ether side.

I think the problem with that psptv thing is that it has a huge block conector on it. I dont know if you'll be able to fit it in without using there ugle case.

BURNNNNNNNN it's about time I thought everyone was picking on me

replicashooter · « **Reply #95 on:** January 13, 2007, 09:58:22 AM »

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 09:46:02 AM

Now whos not reading the posts properly. I told you, 14, but I added another 3v for the led's so 15 in total. But If you mean cables, theres four, I could have done less but I quite like the idea of having 2 on ether side.

Thats why I asked - 15 still makes no sense, haven't you connected the analogs or am I missing something here?

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 09:46:02 AM

I think the problem with that psptv thing is that it has a huge block conector on it. I dont know if you'll be able to fit it in without using there ugle case.

Yup, but that big block will come in handy for testing my mod - if the frequency extension works then something will have to be created for a final release.

F00 f00 · « **Reply #96 on:** January 13, 2007, 10:05:07 AM »

Quote from: replicashooter (R&D) on January 13, 2007, 09:58:22 AM

Thats why I asked - 15 still makes no sense, haven't you connected the analogs or am I missing something here?

Your not missing something your just not keeping up with the thread.

One of the analoge sticks is connected to the [] O X V buttons so they share wires. The other only needs 3.

replicashooter · « **Reply #97 on:** January 13, 2007, 10:09:32 AM »

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 10:05:07 AM

Your not missing something your just not keeping up with the thread.

One of the analoge sticks is connected to the [] O X V buttons so they share wires. The other only needs 3.

Do the start, select, L2 and R2 buttons work on your controller?

F00 f00 · « **Reply #98 on:** January 13, 2007, 10:14:28 AM »

Quote from: replicashooter (R&D) on January 13, 2007, 10:09:32 AM

Do the start, select, L2 and R2 buttons work on your controller?

Are you winding me up? I told you that too. . . Because of the way my setup is I figured there was no need to do the start and select because I can easily reach them and there not needed in most games. I also sugested wiring the L2 and R2 buttons to the keys that the psp ps1 emu mapped them to. But as I dont have that emu I didnt bother.

replicashooter · « **Reply #99 on:** January 13, 2007, 10:15:36 AM »

Oh, the irony

F00 f00 · « **Reply #100 on:** January 13, 2007, 01:49:47 PM »

Just finished replacing all the psp leds with white ones. Looks cool. Man those led swaps are a pain.

TR4G- · « **Reply #101 on:** January 13, 2007, 03:07:34 PM »

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 01:49:47 PM

Just finished replacing all the psp leds with white ones. Looks cool. Man those led swaps are a pain.

all of em? wow, post a pic please or even a vid on the acidmods utube file

F00 f00 · « **Reply #102 on:** January 13, 2007, 03:11:32 PM »

Quote from: TR4G- (R&D) on January 13, 2007, 03:07:34 PM

all of em? wow, post a pic please or even a vid on the acidmods utube file

Yep all. My baterys gone on my cammera. If I get chance I'll pop out and get some.

F00 f00 · « **Reply #103 on:** January 13, 2007, 06:21:15 PM »

Ok theres a small clip of the LEDs on the acidmods acount

http://www.youtube.com/watch?v=iG9jX4f4u0M

The sholders and the wifi lights are white too but there not in it. I'll hopefuly get most of it finished tomorow.

SYSTEM aka (Cyberpyrot) · « **Reply #104 on:** January 13, 2007, 06:27:37 PM »

Quote from: F00 f00 (R&D-Q&A) on January 13, 2007, 06:21:15 PM

Ok theres a small clip of the LEDs on the acidmods acount

http://www.youtube.com/watch?v=iG9jX4f4u0M

The sholders and the wifi lights are white too but there not in it. I'll hopefuly get most of it finished tomorow.

awsome

F00 f00 · « **Reply #105 on:** January 14, 2007, 10:58:46 AM »

Just finished testing. Finaly everything seems ok (thanks joe). The left analoge remains untested. But since I've done a few stick mods I am not to worried about that bit *fingers crossed*

Heres a pic, might be a good bigfoot.

TR4G- · « **Reply #106 on:** January 14, 2007, 11:03:55 AM »

Quote from: F00 f00 (R&D-Q&A) on January 14, 2007, 10:58:46 AM

Just finished testing. Finaly everything seems ok (thanks joe). The left analoge remains untested. But since I've done a few stick mods I am not to worried about that bit *fingers crossed*

Heres a pic, might be a good bigfoot.

is it hard to cut off the original LEDs? cuase i could imagine them snapping off really easily

F00 f00 · « **Reply #107 on:** January 14, 2007, 11:06:59 AM »

Its not hard getting them off. Its just a pain to get the new ones on. Worth it though.

TR4G- · « **Reply #108 on:** January 14, 2007, 11:08:42 AM »

Quote from: F00 f00 (R&D-Q&A) on January 14, 2007, 11:06:59 AM

Its not hard getting them off. Its just a pain to get the new ones on. Worth it though.

yeah, i just tryed it on my old cell phones LEDs with an X-acto knife, and the original LEDs cracked into a bunch of pieces but i got it off.......just wondering if its supposed to come off cleanly or not

F00 f00 · « **Reply #109 on:** January 14, 2007, 11:17:04 AM »

Yeah I had that with phones too. No its not as bad as that. They seem to stay together

F00 f00 · « **Reply #110 on:** January 14, 2007, 01:39:39 PM »

Well its been a long day of wiring and rewiring and scraping tracks and dispair, but I now have the controller working. Uploading video now.

Still to do.

Change cases
Put in sockets
put on plugs
wrap cables
Test analoge (that had better work first go or the bin men are going to be collectig blue glowing bags from my house).

Then add second nub when it arives.

Video coming in half an hour.

TR4G- · « **Reply #111 on:** January 14, 2007, 01:44:57 PM »

Quote from: F00 f00 (R&D-Q&A) on January 14, 2007, 01:39:39 PM

Well its been a long day of wiring and rewiring and scraping tracks and dispair, but I now have the controller working. Uploading video now.

Still to do.

Change cases
Put in sockets
put on plugs
wrap cables
Test analoge (that had better work first go or the bin men are going to be collectig blue glowing bags from my house).

Then add second nub when it arives.

Video coming in half an hour.

so does ur ps2 controller is going to control every thing on the psp?

F00 f00 · « **Reply #112 on:** January 14, 2007, 01:55:59 PM »

Yep. Well apart from start and select (I just couldnt be bothered, if I ever do another I'll do it). The right stick is modded with cybers right analoge mod.

F00 f00 · « **Reply #113 on:** January 14, 2007, 03:19:10 PM »

Ok video is up.

Let me know what you think. . .

http://www.youtube.com/watch?v=E_po8mQEqCc

replicashooter · « **Reply #114 on:** January 14, 2007, 03:32:24 PM »

Looking good - Those white LEDs are seriously bright 8)

F00 f00 · « **Reply #115 on:** January 14, 2007, 03:35:54 PM »

Quote from: replicashooter (R&D) on January 14, 2007, 03:32:24 PM

Looking good - Those white LEDs are seriously bright 8)

I know. I bridged the resistors. It might have been to much. Its pretty distracting. F

it. It looks cool.

replicashooter · « **Reply #116 on:** January 14, 2007, 03:38:11 PM »

Quote from: F00 f00 (R&D-Q&A) on January 14, 2007, 03:35:54 PM

I know. I bridged the resistors. It might have been to much. Its pretty distracting. F it. It looks cool.

As long as they are within tolerances then it shouldn't be a problem, best to check before sealing the PSP up though as I've had to reopen a mod due to toasted LEDs and it is irritating.

Best to take the time whilst it's open to 100% everything.

F00 f00 · « **Reply #117 on:** January 14, 2007, 03:41:29 PM »

Quote from: replicashooter (R&D) on January 14, 2007, 03:38:11 PM

Best to take the time whilst it's open to 100% everything.

Tell me about it. Its been open a month.

I am pretty sure the leds ok. It had better be because I took the resistor out. I realy dont want to have to put another in.

replicashooter · « **Reply #118 on:** January 14, 2007, 03:45:46 PM »

I've only ever opened up a PSP once and that was the early ones to mod the dpad and buttons. Keeping the dust at bay was a

in my low budget clean room (tiled shower/condensation) with compressed air as the bare TFT attracts even the smallest fragment in the air.

How is yours after being open for a month? Can you close it up without any debris - Took me about 5 attempts to get it done and that's why I'm reluctant to POC mods.

Going to pick up a beaten up unit soon to keep open all the time though :thumbsup:

F00 f00 · « **Reply #119 on:** January 14, 2007, 03:51:39 PM »

Quote from: replicashooter (R&D) on January 14, 2007, 03:45:46 PM

I've only ever opened up a PSP once and that was the early ones to mod the dpad and buttons. Keeping the dust at bay was a in my low budget clean room (tiled shower/condensation) with compressed air as the bare TFT attracts even the smallest fragment in the air.

How is yours after being open for a month? Can you close it up without any debris - Took me about 5 attempts to get it done and that's why I'm reluctant to POC mods.

Going to pick up a beaten up unit soon to keep open all the time though :thumbsup:

Well my flat mate is pretty good with the dusting so . . .

Nah, I am not worried. Its derty but I'll get it clean. I've got to compleatly diasemble it tomorow. So I'll sort it then.

News:

Author Topic: PSP external controller mod (F00 f00s doc oc thread declassified) PART 2 (Read 62208 times)

Chaos