Author Topic: Internal SD MOD on Slim PSP [FINISHED] (Read 36822 times)

Tri-edge · « **Reply #30 on:** November 07, 2008, 07:26:07 AM »

Quote from: j.s2ghetto on November 07, 2008, 04:24:03 AM

I now this is an old thread and it is bad to bump it but i must

I need to know how u did it to make it for both to work with just a switch cuz i have the coolest idea that will save everyone money and space in there slim (probably)

okay here i go
wat if we take one of these:http://www.dealextreme.com/details.dx/sku.16489
and like the original sd mod take it apart and turn the micro sd slots into SD slots
sound better than this http://www.dealextreme.com/details.dx/sku.17296 and cheaper

Now if u can plz let me know i would really apreciate it i want to buy the supplys for this but i don't if i can't do it right

I would do the Cr-3100 simply because it can hold 64gb instead of 32gb like the CR-5400

j.s2ghetto · « **Reply #31 on:** November 07, 2008, 01:39:45 PM »

Ya but i want to try this and on the headlines for them on am they both say 32gb max

PhotoFast CR-3100 Dual-Slot SDHC SD to MS Pro Duo Adapter/Converter for PSP 2000 (32GB Max)

PhotoFast CR-5400 Dual-Slot SDHC MicroSD/TF to MS Pro Duo Adapter (32GB Max)

and i don't need anymore then 16gb anyways

Electro · « **Reply #32 on:** November 07, 2008, 03:57:21 PM »

Quote from: j.s2ghetto on November 07, 2008, 01:39:45 PM

Ya but i want to try this and on the headlines for them on am they both say 32gb max

PhotoFast CR-3100 Dual-Slot SDHC SD to MS Pro Duo Adapter/Converter for PSP 2000 (32GB Max)

PhotoFast CR-5400 Dual-Slot SDHC MicroSD/TF to MS Pro Duo Adapter (32GB Max)

and i don't need anymore then 16gb anyways

Your trying to do this?:
Idea for use of SD cards on PhotoFast CR-5400 Dual Socket Micro SD!
https://www.acidmods.com/forum/index.php?topic=23911.0

I was going to wire my readers like this:

See the 2 contacts in the BLUE box?

That is where you wire the power to PSP's motherboard and the card reader.

j.s2ghetto · « **Reply #33 on:** November 08, 2008, 12:24:15 AM »

kind of but instead of dual micro sd socket i want dual SD socket

wowzerz89 · « **Reply #34 on:** February 25, 2009, 12:07:14 PM »

hey, im new at modding my psp but yeah
im 19 and i got transparent housing with 14 LED's in there and now i want to do the internal cam mod and the internal SD mod....... they both seem quite simple but i am SO STUPID unless i have the perfect diagram haha

so about the SD mod....... on the SD card reader...... (i yanked it out of my dads 9 in 1 card reader) *whoops* lmfao..... anyways..... about it..... there are 2 extra pins on it....... *noted in 2 posts above me by electro*..... i have not a clue where to solder those....

can someone please draw a simple diagram for me or edit the one below? :]

j.s2ghetto · « **Reply #35 on:** February 25, 2009, 02:47:58 PM »

Don't bump old topics but since u already did might as well help u

look at this link
http://pinouts.ru/Memory/sdcard_pinout.shtml
and this one
http://www.interfacebus.com/MicroSD_Card_Pinout.html

now wat u want to do is find out wat pin is #1 on ur ms to micro SD converter
once u know that connect the pins according

MicroSD-->SDHC
1-->9
2-->1
3-->2
4-->4
5-->5
6-->3+6
7-->7
8-->8

hope that helps

Tri-edge · « **Reply #36 on:** February 25, 2009, 03:59:49 PM »

actually take a look at this topic and it will tell you all you need to know
https://www.acidmods.com/forum/index.php?topic=14584.0

j.s2ghetto · « **Reply #37 on:** February 25, 2009, 06:33:31 PM »

Quote from: Tri-edge on February 25, 2009, 03:59:49 PM

actually take a look at this topic and it will tell you all you need to know
https://www.acidmods.com/forum/index.php?topic=14584.0

or that lol

wowzerz89 · « **Reply #38 on:** February 25, 2009, 09:49:49 PM »

im sooooooooooo sorrybut i am still lost.

but i am trying to wire this

so this goes inside of it.........

to

so this goes inside.......

so how do i wire the first SD memory stick adapter to the memory stick pro duo adapter?
i want to build it internally but i get mixed up with where to solder :/

sorry again guys

j.s2ghetto · « **Reply #39 on:** February 26, 2009, 04:53:33 AM »

if ur this confused u should do a little more research berfore attempting this
ur missing the microSD to MS pro duo adapter to start with

wowzerz89 · « **Reply #40 on:** February 26, 2009, 06:39:07 AM »

why do i need that though? :/

Tri-edge · « **Reply #41 on:** February 26, 2009, 07:03:34 AM »

because you can't just hook up a sd slot to a ms pro duo slot without an adaptor.

j.s2ghetto · « **Reply #42 on:** February 26, 2009, 12:51:32 PM »

Quote from: Tri-edge on February 26, 2009, 07:03:34 AM

because you can't just hook up a sd slot to a ms pro duo slot without an adaptor.

exactly
wat i recommend u do is buy a cr-5400 of ebay or dx
wat the cr-5400 does is take the MS signals and turns them into MicroSD which u can turn into SDHC by wiring it up differently

Quote from: j.s2ghetto on February 25, 2009, 02:47:58 PM

Don't bump old topics but since u already did might as well help u

look at this link
http://pinouts.ru/Memory/sdcard_pinout.shtml
and this one
http://www.interfacebus.com/MicroSD_Card_Pinout.html

now wat u want to do is find out wat pin is #1 on ur ms to micro SD converter
once u know that connect the pins according

MicroSD-->SDHC
1-->9
2-->1
3-->2
4-->4
5-->5
6-->3+6
7-->7
8-->8

hope that helps

wowzerz89 · « **Reply #43 on:** February 26, 2009, 12:53:20 PM »

ok, last question..... i swear.......
is it possible to yank out the duo slot on psp mobo and replace it with an sd slot? :]
if not then ima do the above :P

j.s2ghetto · « **Reply #44 on:** February 26, 2009, 01:36:08 PM »

nope u have to use a microSD to MS adapter thats the only way but u could take the ms slot off and put ur new SDHC slot there

Tri-edge · « **Reply #45 on:** February 26, 2009, 02:06:48 PM »

Quote from: j.s2ghetto on February 26, 2009, 01:36:08 PM

nope u have to use a microSD to MS adapter thats the only way but u could take the ms slot off and put ur new SDHC slot there

after you wire it up to microSD to MS adapter first.

rgarjr · « **Reply #46 on:** February 26, 2009, 11:20:59 PM »

So in other words there's just has to be a microSD to MS conversion chip so you can use the big SD cards. I would just personally get a CR-3100 and be done with it, but that's just me.

Here's a diagram on how it would be, the pinouts of course are not correct (for illustration purpose). U can see the MS to SD adapter is acting like a middle man or a bridge.

So if you wanted to remove your OEM MS slot and fit a SD slot:

1> Unsolder the MS slot
2> Solder wires from your mobo's MS pins to the MS to microsd adapter
3> Solder wires from the microsd adapter to your SD slot
4> Lay down your SD slot and secure it in place.
5> Cut case to fit new SD card slot
6> Shove a big SD card in there and pray it works

Tri-edge cleared some things up with your post

j.s2ghetto · « **Reply #47 on:** February 27, 2009, 06:12:29 AM »

Quote from: rgarjr on February 26, 2009, 11:20:59 PM

So in other words there's just has to be a microSD to MS conversion chip so you can use the big SD cards. I would just personally get a CR-3100 and be done with it, but that's just me.

So if you wanted to remove your OEM MS slot and fit a SD slot:

1> Unsolder the MS slot
2> Solder wires from your mobo's MS pins to the MS to microsd adapter
3> Solder wires from the microsd adapter to your SD slot
4> Lay down your SD slot and secure it in place.
5> Cut case to fit new SD card slot
6> Shove a big SD card in there and pray it works

Tri-edge cleared some things up with your post

the prob wit the cr-3100 is u can't take the sd slot and place it in the original slots place and it removes alot of space in ur umd drive that u could use for a million different mods

on my current psp i am removing the ms slot and placing in a spring loaded sdhc slot (trust me this will make ur life so much easier) and because i am doing this i have space to place a speaker in my umd area a jewel some surprises and possibly (if i get money soon) a go cam

so in my opinion go wit the cr-5400 and if u want 2 sdhc slots just wire up the other microSD slot to a sd slot and place it in the umd area

rgarjr · « **Reply #48 on:** February 28, 2009, 12:15:30 AM »

I've been doing a bit of research on this mod for my phat. On the phat its easier since you can get an extra WIFI/MS board and work on that.

j.s2ghetto · « **Reply #49 on:** February 28, 2009, 05:32:31 PM »

very nice diagram

just wondering how do u make those

Tri-edge · « **Reply #50 on:** February 28, 2009, 05:57:03 PM »

I think he uses autocad

rgarjr · « **Reply #51 on:** March 01, 2009, 12:14:44 AM »

Yeah just using Autocad for the drawings.

But now that I'm thinking about it, I dunno if its a good idea to do this mod since you will probably cap out at 16GB using the single SD card? Cuz I don't think you can use a 32GB card with this setup.

I guess if you want more storage u can probably get a PhotoFast CR-5400, crack it open and wire up 2 SDHC sockets and try and fit them inside.

Tri-edge · « **Reply #52 on:** March 01, 2009, 07:19:53 AM »

Quote from: rgarjr on March 01, 2009, 12:14:44 AM

Yeah just using Autocad for the drawings.

But now that I'm thinking about it, I dunno if its a good idea to do this mod since you will probably cap out at 16GB using the single SD card? Cuz I don't think you can use a 32GB card with this setup.

I guess if you want more storage u can probably get a PhotoFast CR-5400, crack it open and wire up 2 SDHC sockets and try and fit them inside.

I thought the photofast Cr-5400 had a 32gb limit on it, like 16+16=32 kind of limit

rgarjr · « **Reply #53 on:** March 01, 2009, 09:05:48 AM »

yeah it does cap at 32

wowzerz89 · « **Reply #54 on:** March 01, 2009, 10:56:24 AM »

VERY NICE DIAGRAMS!!!

that helped me out so much lol
but thanks

ok this is another stupid question...... was this a joke?

Quote from: rgarjr on February 26, 2009, 11:20:59 PM

1> Unsolder the MS slot
2> Solder wires from your mobo's MS pins to the MS to microsd adapter
3> Solder wires from the microsd adapter to your SD slot
4> Lay down your SD slot and secure it in place.
5> Cut case to fit new SD card slot
6> Shove a big SD card in there and pray it works

cause if not..... then ima do it but i won't know how to wire it :/

Tri-edge · « **Reply #55 on:** March 01, 2009, 01:31:25 PM »

that's pretty much the order that you do it in. Good luck and don't forget to post pictures when your done

News:

Poll

What do you guys think?

Author Topic: Internal SD MOD on Slim PSP [FINISHED] (Read 36822 times)