Author Topic: adjustable 555 rapid fire on trigger radio shack brand (Read 124268 times)

GhoSt · « **Reply #90 on:** February 13, 2009, 03:06:49 AM »

I used 2n2222 cas I had some lying round and they worked.

tuck · « **Reply #91 on:** February 13, 2009, 08:40:12 AM »

thanks for all your help im just going to make a new one i think the pot went out it only fires one shot now i tested the pot and i get the same reading on both sides of it
thanks again

Modded Matt · « **Reply #92 on:** February 13, 2009, 09:14:13 AM »

there ya go.

I will revise each step of the tut with a pic to help clarify everything this weekend.

as for the transistor, I need to look when I get home, but I beleive it was the 2n2222 switching type.

CMTModz · « **Reply #93 on:** February 13, 2009, 09:49:37 AM »

hey were do i solder the wires for the pot i know is pin 2 and 7 http://i681.photobucket.com/albums/vv177/pimpchryz/ModdedMatt018-2.jpg

Modded Matt · « **Reply #94 on:** February 13, 2009, 01:59:48 PM »

it dont matter pin #2 and pin #7 pick the closest open hole to the chip. I am starting to build a new one now for the tut update.

CMTModz · « **Reply #95 on:** February 13, 2009, 06:59:21 PM »

witch mod is better a9cusoms adjustable rapid fire on trigger or acidmods co5 sleeper

Edit:
will this board work

GhoSt: Please dont double post, just edit the first one

. link images with the

button

taylorclark · « **Reply #96 on:** February 14, 2009, 08:11:48 AM »

im not totally sure, but i think the 555 chip mod works with any board type.

Modded Matt · « **Reply #97 on:** February 14, 2009, 02:30:53 PM »

that is the alien, it is not matrix nor is it CG. I have heard of these, but never seen one, All I can tell you is it works with matrix and it also works the same with CG. I would like to tell you if it will work with that, but I can never find one.

*****2/14/09 pics added to the tut*****

GhoSt · « **Reply #98 on:** February 14, 2009, 02:43:29 PM »

Quote from: modded matt on February 14, 2009, 02:30:53 PM

that is the alien, it is not matrix nor is it CG. I have heard of these, but never seen one, All I can tell you is it works with matrix and it also works the same with CG. I would like to tell you if it will work with that, but I can never find one.

*****2/14/09 pics added to the tut*****

how do you define the alien, because that looks exactly like mine and mine works.

tuck · « **Reply #99 on:** February 14, 2009, 06:26:37 PM »

well just got done making a new one works perfect so far i must of got something to hot i dont know but thanks to everyone that tried to help me

and those new pics will help out others alot good job matt

acid mods is the leaders in modding tech and admins also very quick to reply to your ?'s i thank you

CMTModz · « **Reply #100 on:** February 14, 2009, 10:17:20 PM »

does anybody have a video of it

GhoSt · « **Reply #101 on:** February 14, 2009, 11:26:37 PM »

Quote from: CMTModz on February 14, 2009, 10:17:20 PM

does anybody have a video of it

a vid of it working???

heres the vid of mine
http://nz.youtube.com/watch?v=1d5Mp7Ed71c

soz havn't mastered embeding so that will have to do.

CMTModz · « **Reply #102 on:** February 15, 2009, 12:51:47 AM »

will this work http://www.radioshack.com/product/index.jsp?productId=2062596

Modded Matt · « **Reply #103 on:** February 15, 2009, 07:12:45 AM »

Quote from: CMTModz on February 15, 2009, 12:51:47 AM

will this work http://www.radioshack.com/product/index.jsp?productId=2062596

no it must be the tlc555 (low curent)http://www.radioshack.com/product/index.jsp?productId=2062595

Quote from: GhoSt_Death on February 14, 2009, 02:43:29 PM

how do you define the alien, because that looks exactly like mine and mine works.

that is not a microsoft product, look closely.

tuck · « **Reply #104 on:** February 15, 2009, 07:54:54 AM »

i can 100% say it works. these guys know their stuff ! dont have a vid to show mine, but i wouldn't waste my time posting here if it didn't. just get the stuff matt posted that you need follow the easy instructions made even easier by matt with the new pics and there you go you got a modded controller

if you have any problems someone here will help you. ghost and matt are very quick and smart to reply to your ?'s

CMTModz · « **Reply #105 on:** February 15, 2009, 12:02:58 PM »

how cum you solder port 3 for the pot

Modded Matt · « **Reply #106 on:** February 15, 2009, 03:47:08 PM »

Quote from: CMTModz on February 15, 2009, 12:02:58 PM

how cum you solder port 3 for the pot

ok you got me, first off the picture in your post dont exist anymore, you made me look closely at my pics and it is so easy to make a mistake, but if you look at the pic you posted, it is not pin #3 that the mistake occured, I accededntally soldered one end of the pot to pin #6 instead of seven, the other side wnet to pin #2, that never changed. remember what I said about sober hands LOL... the verbage has allways been correct....pics are now all correct....I will follow up with an insatall, but the wife has had enough after this weekend. I did 4 other pic mods, ontop of this

CMTModz · « **Reply #107 on:** February 17, 2009, 04:22:37 PM »

will this pc board work

GhoSt · « **Reply #108 on:** February 17, 2009, 08:32:38 PM »

that could work you are just gona have to bridge alot of pads to make rows.

CMTModz · « **Reply #109 on:** February 17, 2009, 09:30:18 PM »

how do i bridge alot of pads to make rows

tuck · « **Reply #110 on:** February 17, 2009, 10:02:19 PM »

i would call differ radio shacks in your area and ask if they have a ic pc board.cause at one in my area didnt have them and another one did. that type you have there doesnt have a contact area for one hole row. lets just say like pin one there would be a contact area through that hole row just for pin one.look at the pics matt has you can see the difference between that one and the one you have.when i went to get my parts they said there is no such number as the one matt said to get so i got this one
Dual General-Purpose IC PC Board
Model: 276-159 | Catalog #: 276-159
cost is $2.49 it might be easier just to take that one back and get this one

Modded Matt · « **Reply #111 on:** February 18, 2009, 04:11:45 AM »

that board will work its just requires more skill, the one tuck listed is for beginers and I recomend you use that, or if you dont consider yourself a beginer, and want a real task, build the mod without the bread board.. be careful with the heat though.

michaelmotorcycle · « **Reply #112 on:** February 23, 2009, 05:28:55 PM »

does this mod work with the older style matrix controllers? does any 555 mod work through the right trigger or will you have to upgrade to a pic?

Modded Matt · « **Reply #113 on:** February 24, 2009, 04:43:45 AM »

this mod works with all controllers

no, not all 555 setups work through the trigger, but this one does. if you want rapid fire on a button you can do that too, but some things need to change, let me know if this is what you want and I will relist it for you, but I think I listed the button mod on page two?

michaelmotorcycle · « **Reply #114 on:** February 24, 2009, 04:42:22 PM »

I have done a dozen or so rapid fire with button. I could not get this mod to work, i am going to go try again, i dont think i hooked up to controller correctly. I am a little confused about the ground wires.

I am using a matrix if that makes a difference

michaelmotorcycle · « **Reply #115 on:** February 24, 2009, 05:07:19 PM »

got it to work thanks for tut really easy. used a different controller, other controller ground lead was broken.

GhoSt · « **Reply #116 on:** February 24, 2009, 09:15:49 PM »

just as a reference if you want rapid fire on a external button, here is the diagram

Modded Matt · « **Reply #117 on:** February 25, 2009, 04:56:29 AM »

Quote from: michaelmotorcycle on February 24, 2009, 05:07:19 PM

got it to work thanks for tut really easy. used a different controller, other controller ground lead was broken.

what do you mean the ground leed was broken, it should be very easy to fix. hold you irron on the solder puddle and push the battery leed up from the bottom. it was alot easier than it looked. if you made this mod, you should be able to fix it.

Quote from: GhoSt_Death on February 24, 2009, 09:15:49 PM

just as a reference if you want rapid fire on a external button, here is the diagram

Ghost, please revise your pic here to add the 1k resistor somewhere between the trigger pin and the chip. also, if you use a 2mm tact switch, you can fit it in under the trigger, there the pot arm and the acctual trigger come together if you glue the tact under there, when you pull the trigger half way, it is normal, but if you pull it all the way you feel a slight click and get rapid fire....I think this qualifies for the term "sleeper" LOL...

GhoSt · « **Reply #118 on:** February 26, 2009, 12:39:51 AM »

wow I cut out the resistor with the transistor, pic updated.

tuck · « **Reply #119 on:** February 26, 2009, 07:00:27 AM »

works on matrix cause thats what i have and still going strong.tried it on cod 4&5, gw2,rb6v,halo3.not as rapid on halo as it is on other games unless maybe you use a brute shot all the time

News:

Author Topic: adjustable 555 rapid fire on trigger radio shack brand (Read 124268 times)

michaelmotorcycle

michaelmotorcycle

michaelmotorcycle