THERE ARE 2 WAYS TO DOO THIS. WATCH SECOND VIDEO!!!ok guys, here you go. i decided to make a new internal dual nub for those of you who are trying to make them. this only shows you how to make the nub. it is 100% working and one of the best ways to make a dual nub for your psp. it is similar to wetfusions dual nub but i am using the track pad on the nub for the wiring
DSCF3076ACIDMODS: PSP dual nub tutorialREASONS why its easier and better to make than wetfusions ( NO affence bro your still the reason i made this one!! you started it all! its just my version of your style
![tup :tup:](http://acidmods.com/forum/Smileys/default/tup.gif)
):
1) no grinding the nub
2) easier to make
3) no melting of the nub while soldering wires
Difficulty Rating :2.5/5
TOOLS:-soldering iron and solder
-helper hands (optional)
-kynar wire
-PSP 1000 nub (2000 may work)
-dremel (optional)
-needle
-hot glue gun woth glue sticks
All you for parts is:
step one: get the nub's trace board
step two: grind down the traces as shown in the photo below
step three: put holes on both ends of the black line trace's [ V1]:
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi56.tinypic.com%2Fqn7ipl.jpg&hash=3d3c321bb9015c201bbbb0397aaf5955164aa48f)
[size=8]
OR[/size] [ V2 ]
put holes on the sides of the trace
step four: cut a wire about this long and strip the protective coding off as much as shown in the photo
step six: solder the wire through the holes where the old contact points the the nub use to be [ V1 ]
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi53.tinypic.com%2For84f7.jpg&hash=8c07836323068ef1206a2d66010f051f6f5f8b0a)
step seven: cut off the wire closest to the end of the coding and solder it through the last hole on the nubs old trace board.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi54.tinypic.com%2F2lcnpqr.jpg&hash=4f8b83331532932c38f48a4ee5e8c6cc6124e0d2)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi54.tinypic.com%2F15xmh09.jpg&hash=7887aa155d978033d09ad48666c4af7d89545bdc)
then you must solder a wire to one of the point circled in red. DONT PAY ANY ATTENTION TO THE OTHER WIRE. THATS A LATER STEP!!
step eight: put a wire through the bottom of one of the trace's and solder the two ends together. repeat this step for the rest of the trace's.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi53.tinypic.com%2F19koxu.jpg&hash=3523cc02a10933e5e77c65b3a13a5a5c3ad7bdb5)
OR [ V2 ]
step nine:THIS PART IS VERY IMPORTANT!!punch two holes on the circle trace where it sticks out
step ten: VERY IMPORTANT ALSO!! next but a wire through the holes to it WRAPS around the trace and TOUCHES IT!! this is your
GROUND![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi55.tinypic.com%2Fakdb85.jpg&hash=f37fda46b45f343fd8c8db485fe493f2d7ccbb57)
step eleven:
THIS IS THE MOST IMPORTANT PART!!! you must uses pliers to squeeze the wires and solder as flat as possible.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi54.tinypic.com%2Fo0p1dh.jpg&hash=41fe7f5c5d1fb530eda9f6d72edc793e34848dc9)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi56.tinypic.com%2F104gob6.jpg&hash=eb61f225f53eeed98a0cd193cedd75b3be38ae2f)
step twelve: next cut of and smooth out the bottom part of the nub stick that goes inside of the nub.
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi56.tinypic.com%2F29zdmdy.jpg&hash=7cd164ffaf1f12898543bc0cdc079298c0e62c42)
step thirteen: put together the nub
DSCF3071step fourteen: keep it all together with some glue
DSCF3072step fifteen: install it. use the first four steps of my tutorial for the External dual nub for:
PSP 1000https://www.acidmods.com/forum/index.php/topic,35124.0.htmland
PSP 2000 ONLY use the first pic/ schematic
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi51.tinypic.com%2F14lkq6b.jpg&hash=48794ff58e7169aa39002e927c52b6cc37976803)
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi51.tinypic.com%2Fmkx8xw.jpg&hash=c6aaa4c287c58467ae0455bd71df7c60c2a2d668)
step sixteen: grind doen the area where the nub is going to go on your faceplate. make sure you dont grind all the way through it
![](https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi52.tinypic.com%2F2ajbcsp.jpg&hash=2a8988d54d1d95aa74c69d4d1369f3488fef9a57)
Install it and put your PSP back together.
ENJOY!
PROOF
DSCF3073
Post Merge: October 10, 2010, 05:57:02 PM
ok guys it has been updated. there are two ways to do this. you choose which one you want to do.