Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Not sure if anyone cares. But this community has been good to me. SO here is something you guys here wanted.This is my Dropshot with auto get up hex. There should be Two modes with and without rapid fire.12f683Here you are.http://www.mediafire.com/?coo1u0yseqs75onPin 1 PowerPin 2 LEDPin 4 SYNCPin 5 B ButtonPin 7 RT triggerPin 8 Ground.
hey guys, ive recently tried this code with TWO different curcuit boards and it does the same for both. it wont drop BUT if i remove my batterie pack it automatically drops ill post pics of my install later. ps does any 1 have the diagram for the matrix pcb?
THIS DOES NOT WORK ON MATRIX - ONLY CG.You should use an optocoupler if possible for the install.IF you are installing on a CG2 make sure you cycle back to off (as the mod will turn on once you put your batter pack in) so after you turn the controller on, cycle the mod back to off then start over should work fine.Something wring with your install if this is not working for you on a CG or CG2
Look at my post in this thread, I installed it on a cg2. Just have to take the battery pack out to turn it off when the controller is off. https://www.acidmods.com/forum/index.php/topic,39929.msg313231.html#msg313231