Please help support the site by donating at the link below.https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8ZRU34U47BESW
Dont bother buying a NANDx they are outdated, JRPv2 does everything it does and moreuninstall the drivers you have now, follow the instructions here http://team-xecuter.com/forums/showthread.php/85709-New-Xecuter-NAND-X-amp-J-R-Programmer-Drivers and you should have no problemsthese are the drivers from TX https://mega.co.nz/#!bwZVjQpC!K9XNvEqqQnyRyzUbz57JS3JQTfVkbz0Cxr61ibSsxT0
the wire you have connected to the jrp and the cool runner is correct for programming the coolrunner , make sure the console is off. and the coolrunner is on slim and prog. and then hook the usb up to the pc and you should be able to program the coolrunner. Make sure that the console is unplugged. from the power brick. you do not want any power to the coolrunner from the xbox.
what firmware are you on know on the jrp? should work for you , i wont be home till later so I will get with you as soon as i can on skype to help.
should check to see if the pins are bent on the jr programmer where you would plug in the cable. i would also desolder all the wires and then try to program the coolrunner.
I found another coolrunner. I will try to get it shipped out today for you to help you along.
His B goes directly to ground...
Make The Wires For E And Fthe Same Length Amd As Short As You Can. Also I Dont See The Point B Being Connected To The Oscillator. Let Me Know How It Goes.edit: yes you need jrunner to for the network xell boot. the xbox needs to be connected with an ethernet cord to your router. with jrunner running and the console attemtping to boot you will have to hit the scan ip button. this will read the xbox and xell ip address and then give you the cpu key and dvd key.also you might have to shorten the blue cpu wire, there is an alternate point on top of the motherboard. im at school so i wont be able to look it up for you.
Sounds like it was trying to glitch. did you try turning it on with the open tray button? that is how mine loads xell... I may be wrong but thats my 2c