XB1 Controller PCB Scans, Traces and Info - 1697

[KeptWolf769]

Hi RDC, my model 1697 had severe stick drift on both sticks so I tried replacing them. I was able to replace the right stick easily with no issues and it was working perfectly when I tested. The left stick on the other hand gave me a hard time and my U11 component came off while I was using my hot air gun to remove the broken stick. I put it back and was able to replace the stick but now the controller goes off every time I turn it on and attempt pairing with my console. I feel maybe It wasn't just my U11 that came off, but I can't even tell or it may be a totally different problem. Your advice would really be helpful.

https://share.icloud.com/photos/073xNkHiPd-h1z2yyDKeg-Smg
https://share.icloud.com/photos/0ffCRiaHtMtuBx1P88G4ZaFcA

[FlashX]

Hi all, my 1947 controller has suddenly got stuck drift on the Right stick. It only happens in the UP position and that?s the only fault with it. Opened it up and saw that there is some water damage around some components.

Any help towards finding a solution would be appreciated.

Thanks

[niceshot]

Hi dear members, does anyone have the values of R9, R10, R37 and C73?

[RDC]

R9 = 33ohms
R10 = 33ohms
R97 (not 37) = 100ohms
C73 = 33nF

[KeptWolf769]

My charging port came off and it seems the upper two narrow pins have damaged through holes, is there any where I can link those to?

[RDC]

The thru hole connections of that thing are mainly for mounting purposes, and are also just grounds.