Author Topic: adjustable 555 rapid fire on trigger radio shack brand (Read 124759 times)

ieuantheiron · « **Reply #180 on:** June 19, 2009, 12:31:14 PM »

hi...i have all the stuff for the rapid fire its just i dont know what lead is what on the npn transistor (case info TO92h) it would be great if someone knew thanks

haloed · « **Reply #181 on:** June 20, 2009, 09:37:56 AM »

THIS IS FOR ADJUSTABLE 555 RAPID FIRE ON MOMENTARY SWITCH

I altered your schematic..
Duel Momentary Switches, with toggle on/off: and Trimmer Potentiometer.

Tested And Working.

I made this design since I had the Momentary switches installed already so I wanted to keep them, The toggle on\off is obliviously for the mod to turn on\off, and the Trimmer.. I love it the ability to change the rate of fire, amazing.

F4thAcE · « **Reply #182 on:** June 20, 2009, 01:02:01 PM »

ill test that haloed got a friend of mine who plays halo alot wants it duel ill try this for him

haloed · « **Reply #183 on:** June 24, 2009, 02:01:36 PM »

Post Your Results If You Do.
but you may want to put the resistor back in at the trigger points, not absolutly nesecary, but it should be there

Modded Matt · « **Reply #184 on:** June 25, 2009, 04:20:32 AM »

this has been discussed earlier in the thread. yes it works.

camkillers10 · « **Reply #185 on:** June 26, 2009, 02:20:19 AM »

i was just wondering if you could run a led so you no when its on cause tomorrow im going to get the parts for and i was thinking it would be cool to have a led to see if it on so if you can email me please CAMKILLERS@gmail.com please and thank you

Modded Matt · « **Reply #186 on:** June 26, 2009, 05:45:57 AM »

cam killers, please take the time to read, or even skim through the thread, as this has been done, and there is more than one diagram showing how this can be acomplished.

camkillers10 · « **Reply #187 on:** June 28, 2009, 02:16:37 AM »

hey any one trying this make sure u get the tlc555 timer because thats my only mistake besides that its easy i bought the 555ic so make sure

Post Merge: June 29, 2009, 09:06:00 PM

do u think this would work on ps3

ieich26 · « **Reply #188 on:** July 11, 2009, 10:38:47 AM »

If i wanted to use a resistor instead of the pot which would be faster a smaller one or bigger.
and what size is perfect for WAW.

(If you figure out the new patch)ß

Modded Matt · « **Reply #189 on:** July 12, 2009, 08:04:38 AM »

setthe pot, and test the resistance.

ieich26 · « **Reply #190 on:** July 13, 2009, 08:33:15 AM »

im trying to make it non adjustable
but i guess ill just go buy a bunch of resistors and find out

haloed · « **Reply #191 on:** July 13, 2009, 03:27:57 PM »

Quote from: ieich26 on July 13, 2009, 08:33:15 AM

im trying to make it non adjustable
but i guess ill just go buy a bunch of resistors and find out

You don't have a multimeter or Ohmmeter? If not I recommend investing in one to find the proper resistance.
Because If you just put a random resistor it can potentially ruin your controller(Triggers).

Modded Matt · « **Reply #192 on:** July 14, 2009, 04:51:16 AM »

good point, but it should not hurt the controller, just the 555 chip itself, as the triggers are protected from the 1K off pin three, with the pot or resistor, you are changing the way the chip oscolates. but yea haloed has a good point.

X-Calibur · « **Reply #193 on:** July 19, 2009, 12:53:29 PM »

Very good tut easy to follow and explains enough for the general public like me. For some reason though my rapid fire stutters sometimes like in the middle of a clip it will pause or "break" for not even a second and then continue but it is a lil annoying if anyone has a clue what it could be plz message or post back. The only thing I could recommend for this is posting different places to place the chip in the controller where it can fit and where people have put it if you have to cut the inside a lil bit or w/e. I put my chip in the lil spot on the top part of the controller underneath the left joystick next to the D-Pad and above the left rumble there is a lil pocket. I'm also wondering if using smaller gauge wire is ok because the 30 gauge seemed a lil too delicate for me and kept breaking at the solder joints. TTYL everyone.

jdcx95 · « **Reply #194 on:** July 19, 2009, 04:29:53 PM »

Modded Matt, thanks SO much for this! The tutorial was very clear and a person like me could follow it! I didn't even make any mistakes, worked the first time haha. Works great, but its easy to hit the cap on cod4 =p (unless i didn't do it right)

Modded Matt · « **Reply #195 on:** October 09, 2009, 08:46:15 PM »

oops..lol..bump

Nukeman13 · « **Reply #196 on:** October 11, 2009, 11:19:10 AM »

nice schematic. thanks!

spurgurgle · « **Reply #197 on:** October 12, 2009, 03:06:36 AM »

lol

Quote

Quote from: modded matt on October 09, 2009, 08:46:15 PM

oops..lol..bump

lookkool3 · « **Reply #198 on:** October 12, 2009, 10:02:09 PM »

i got a few question first off
haloed whats the left trigger for?
second modded matt where your trigger supposed to go? or do you use the current trigger with this mod?

oh yeah one more thing modded matt do you think it would be a good idea to drill a hole for the potomitor to adjust it for different games? sorry if you guys already done this and im a little behind please dont chew me up

Quote from: haloed on June 20, 2009, 09:37:56 AM

THIS IS FOR ADJUSTABLE 555 RAPID FIRE ON MOMENTARY SWITCH

I altered your schematic..
Duel Momentary Switches, with toggle on/off: and Trimmer Potentiometer.

Tested And Working.

I made this design since I had the Momentary switches installed already so I wanted to keep them, The toggle on\off is obliviously for the mod to turn on\off, and the Trimmer.. I love it the ability to change the rate of fire, amazing.

Quote from: modded matt on December 01, 2008, 08:40:14 AM

Modded Matt · « **Reply #199 on:** October 13, 2009, 04:42:56 AM »

my origional design (as you posted it above) uses the 360 controllers trigger to fire rapidly. the on/off switch turns rapid fire on/off this is a building block that people have tweeked to fit thier needs.

in the modified schematic by haloed, he has rapid fire on an extra button, and added the left trigger.

I personally would mount the pot through the controller. so it can be adjusted for other games.

I have the install tut finished, but my photobucket is on the verge of locking for the month due to bandwidth restrictions (the high res pics I took for the xclamp fix and 360 tear down tuts ate it up.)

lookkool3 · « **Reply #200 on:** October 13, 2009, 04:17:54 PM »

if i play with the control online will it get patched? i made a rapid fire with no chip for my friend and he said that what happened

milko002 · « **Reply #201 on:** October 13, 2009, 10:09:11 PM »

Hey!!! This thing it free to who ever whats it. I am to stoopied..... to figuer programing out. I stick to making controller look DOPE. Just P.M me where to send it to . Just pay shipping 2 bucks... The first one to pm is the one who gets it.

spurgurgle · « **Reply #202 on:** October 14, 2009, 03:27:10 AM »

hey mat you said ur photo bucket is nearly full with ur limited upload on it, this sounds crazy but i use facebook they have no photo or video upload limits and its free cos itts facebook, just set up as joke or fake profile tp upload as many ppics and vids as you want to,

Modded Matt · « **Reply #203 on:** October 14, 2009, 05:36:18 AM »

Quote from: spurgurgle on October 14, 2009, 03:27:10 AM

hey mat you said ur photo bucket is nearly full with ur limited upload on it, this sounds crazy but i use facebook they have no photo or video upload limits and its free cos itts facebook, just set up as joke or fake profile tp upload as many ppics and vids as you want to,

I got hundreds of linked pics, as you can see in this thread, lol I will have them up today

galyion · « **Reply #204 on:** October 17, 2009, 09:15:11 AM »

Quote from: modded matt on January 05, 2009, 10:19:11 AM

I dont have a scope to measure the squarewave but I would guess somewhere from 2-50

i know I'm new here but id thought i throw my 2 cents in. if you do the math it should be adjustable from 7 herts to 1440 hertz. hertz=pulses per second. the .1uf resistor between 1 and 5 will change the fire rate a little but not much
I would use a 47k ohm in between 7 and 8 instead of the 1k it would change the rate to 5-30 instead of the 7-1440 it would also square the pulse wave better for more consistent operation

also be careful adjusting it too fast because you are only adjusting the off time.

lookkool3 · « **Reply #205 on:** October 17, 2009, 01:29:01 PM »

hey modded matt do i really need to use the pcb board from radio shack and what type of wire should i use 30 gague or 22 gague?

Modded Matt · « **Reply #206 on:** October 17, 2009, 05:34:00 PM »

you dont have to use that board, any will do, or if your good you can free form it. wire dont matter, make sure all the other parts are exact though

t0pP8uZz · « **Reply #207 on:** October 21, 2009, 05:58:51 PM »

Just finished this mod! didnt order the exact parts, but i found close enough parts off farnell as im from UK. mod works fine! i still havent assemled the controller because tomorow im adding a led and drilling a hole to alter the pot.

if anyone needs help, just post, im new to modding and this was a breeze! peace

bradleyh · « **Reply #208 on:** April 10, 2010, 12:05:52 PM »

is this verified to work on modern warfare 2? i got it up and running on split screen but then when i tried it online, live capped it. if so, is there a set resistor i could use in place of the pot? thanks

Modded Matt · « **Reply #209 on:** April 14, 2010, 01:40:55 PM »

I was not aware of a cap at all in MW2??? set the pot where you want it and measure the resistance between the two pins, then replace pot with resistor

News:

Author Topic: adjustable 555 rapid fire on trigger radio shack brand (Read 124759 times)

bradleyh